(347) 552-2258 [email protected]

Search results

  1. A

    820-00164 ppbus_g3h = 0.918v

    PPBUS_G3H = 0.918V Fan spin if battery is connected. Found r7121/22 bad resistors. Replaced r7121/22, c7121/22, c7120, isl6259 What should I check next? Thanks.
  2. A

    820-00165 green/orange light ok / no power

    Trigerred SMC_ONOFF_L about 20 times. Multimeter didn't catch any pulse at PM_SLP_S4/3_L.
  3. A

    820-00165 green/orange light ok / no power

    PM_PWRBTN_L drops to 0.360v PM_SLP_S4/3_L no pulse (don't have o-scope at the moment) It won't turn on in SMC bypass mode.
  4. A

    820-00165 green/orange light ok / no power

    Found liquid damage on c5008 and c5007 power supply shows that it takes 0.10A pch_susack_l = 3.272v PM_sysrst_L = 0.010V PM_PCH_SYS_PWROK = 0V PM_PCH_PWROK = 0V PM_RSMRST_L = 3.248V PM_PWRBTN_L = 3.417V SMC_ADAPTER_EM = 3.425V PM_BATLOW_L = 3.297V PCH_DSWVRMEN = 3.191V PM_DSW_PWRGN = 3.427V...
  5. A

    820-00165 No PP5V_S4RS3, green/orange light OK

    PP3V3_S5_AVREF_SMC = 3.3V U7100 on pin 9 0.03V on pin 15 0v
  6. A

    820-00165 No PP5V_S4RS3, green/orange light OK

    Board looks very clean (only small amount of flux near smc). Forgot to mention that at first there was no light on charger because of bad flex cable (reason for smc reflow). SPI resistor and traces looks fine. When trying to bypass smc fan starts to spin for a few seconds.
  7. A

    820-00165 No PP5V_S4RS3, green/orange light OK

    No liquid damage. Before me someone tried to reflow smc PP5V_S4RS3 pulses 2 times then stops. PPBUS = 8.6V G3H = 3.42V PPVRTC = 3.3V 5V_S5 = 5V 3V3_S5 = 3.3V 3V3_SUS = 3.3V
  8. A

    820-00165 won't turn on if IO cable is connected.

    Thank you guys. Works as it should it genuine charger. Can someone explain why it won't turn on with power supply(cable is from genuine 85w charger)
  9. A

    820-00165 won't turn on if IO cable is connected.

    820-00165 won't turn on if IO cable is connected. Had liquid damage around smc and few shorted PPBUS_S5_HS_COMUTING_ISNS CAPS. After cleaning liquid damage and replacing caps now only turn ons if IO cable isn't connected/. If IO cable connected orange light is there.
  10. A

    820-3208 no green light no power

    Won't start in smc bypass mode PM_RSMRST_L 3.4v PM_PWRBTN_L drops when smc_onoff_l triggered
  11. A

    820-3208 no green light no power

    SMC_PM_G2_EN = 3.4v PP3V3_S5 - 3.34V PP3V3_SUS = 3.34V S5_PWRGD =3.38V PCH_INTRUDER_L = 3.01V PCH_INTVRMEN_L = 3.22v PM_BATLOW_L = 3.33V
  12. A

    820-3208 no green light no power

    Hello, 820-3208 no green light or power. Board have no liquid damage. PPBUS_G3H = 8.4V PP3V42_G3H = 3.4V SMC_BCACOK = 3.4V SMC_RESET_L = 3.4V PCH_SRTCRST_L = 3.4V RTC_RESET_L = 3.4V SMC_ADAPTER_EN = 3.4 Known good IO board and cable.
View older results
Top