Search results

This board has no fan, no green light on charger. PP3V42_G3H=3.45V PPBUS_G3H=0V On U7000, pin 2 : CHGR_DCIN=0V. I checked D7105, in diode mode I have 2.85V in one way and 2.27V in the other, so I believe it is dead (values on a good one: 3V and 0.25V) On U7000, resistance on pin 2 is 2 ohm...

ALS, camera, keyboard and LCD backlights are good. HWMonitor has no strange values except for Airport at 129ºC, but I have this value also in good Macbooks. In any case the fan is running normal, increasing only when loaded I will use this Macbook for a few days and see if anything bad happens

Thank you! No, no issues in MacOS, I can run Heaven load test, no problem About history of this Mac: it arrived with a broken screen, I replaced it and tested, I just want to be sure that all is ok, but not confident with these errors

Hi, It is a clean board, which gives no errors when running Macbook internal diagnostic (D key). WIFI and Bluetooth work fine. On the other hand when I run the ASD 3S162, I got errors on load test and airport test, see attached (ignore the first sensor group error, I simply did not have the DC...