Search results

I have shorted cd250 but it continues turning off after logo appears... I will replace all components and try again. Reading now is 0.00 of course.

SMC_PM_G2_EN: 3.45V SMC_ADAPTER_EN: 3.29V SMC_BATLOW_L: 3.32V (I measured this one on Q5040 and it looks nasty, with green pubs, I'll change it later) PM_RSMRST_L: 3.27V PP3V3_S5: 3.33V PM_SLP_SUS_L: 2.50V PP3V3_SUS: 3.32V S5_PWRGD: 3.43V PPVRTC_G3H: 3.32V PPBUS_G3H: 12.61V Yes, I get green...

Where is gmux? Schematics say u9600 but I can't find it on brd. I already removed Q3880 and EFI hardware profile reads the same. 0,819A on that sensor. Something that I forgot to say is the board starts always, but when I shutdown it, it won't turn on again at the moment, I have to wait a few...

I'll try it, but, will this disable thunderbolt I guess. Am I right? I'm still learning, and I have so much to learn,.. I already reflowed u8900. If I remove q3880, what should happen? I'll do it ASAP

Thank you 2informaticos, But, which signals should I post ?

Hi guys, I have this 820-3332 that shuts off when I try to install a new OS (I'm doing it in an external ssd with usb adapter because internal doesn't work, I don't know if this is because ssd is faulty or because the board) I can boot from usb, and I can say "install" choosing the ssd, but when...

Hi guys, I have a 820-3115 water damaged that didn't have green light. PP3V42_G3H was shorted to ground. The short was on U7941, I replaced it, and green light came, but didn't turn on. Later I realized PP3V3_S3 was completely short to ground too, I found the short on U2700, I replaced it, and...