(347) 552-2258 [email protected]

Search results

  1. E

    a1286 Panic (CPU 2 CALLER 0XFFFFF80007964E)

    I got a macbook pro a1286 that keeps throwing this error. it just keeps rebooting non stop. I already tried reinstalling the os and a new hdd. is this the gpu?
  2. E

    [solved]820-2327

    You need to find a clean dump of your Mac and flash it with any spi programmer (i.e tl866)
  3. E

    a1502 missing L7430 (PPDDR_S3_REG_R)

    Sorry I meant orange light. No short on either side. My diode mode reading on both pads is about 0.128
  4. E

    [SOLVED]A1465 super slow; cursor lags

    Duke, Im still experiencing the same issue with the camera disconnected. It works properly with a new one FYI. You can close this post
  5. E

    a1502 missing L7430 (PPDDR_S3_REG_R)

    hello i got a a1502 that was touched by another shop. it shows green light on the magsafe but it doesn't turn on. After visual inspection, i saw that it was missing a inductor L7430 on the line ppddr_s3_reg_r. could this missing component cause a bigger problem (i.e frying cpu)? i tried to find...
  6. E

    820-00164 stuck onncharging logo; no green light

    diode mode reading on SYS_ONEWIRE is 0.720
  7. E

    [SOLVED]A1465 super slow; cursor lags

    The screen wasn't good. It was causing lagging issues. I replaced the screen and now it's working properly. No more lagging. The sensors were fine. You may mark this post as solved. Thanks for the help!
  8. E

    820-00164 stuck onncharging logo; no green light

    So i decided to work again on this board. Atm, this computer, turns on completely but it doesn't show green light at the charger 1) when you connect the mag safe it shows the charging logo on the top right but no green light. The % stays at the same value the entire time. It doesnt increase the...
  9. E

    [SOLVED]A1465 super slow; cursor lags

    I tried a new batteru thatvwas 50% charged and same shit. Wth is causing this? Its driving me nuts
  10. E

    [SOLVED]820-2915 short on pbus_g3h & ppvbat_g3h_conn with solid green light

    I removed F7040 but i still had a short on both pads. I figured the short was on the system side of PPBUS_G3H. I injected some voltage into this pad and found a bad mosfet Q7550. After replacing this and isl6259 i have a working macbook. Please mark this as solved. Thanks!
  11. E

    [SOLVED]A1465 super slow; cursor lags

    i tried to the diagnostics and the only error i get is " the battery requires service Ref code:ppt004". Its noting too useful. can anyone one point me in the right direction? Thanks!
  12. E

    [SOLVED]820-3435 no power/dim green light

    It should be 20 Oms. I got correct reading after replacing the current sense resistors. R7005 was bad. I was only getting 1.73v on CHGR_DCIN. I replaced it with a donor and got a working macbook You can close this post. Thanks!
  13. E

    [SOLVED]820-3476 PPBUS_G3H = 4v

    have you changed the current sense resistors?
  14. E

    [SOLVED]820-2915 short on pbus_g3h & ppvbat_g3h_conn with solid green light

    hello I need some help. I'm stuck and need some guidance. I got this 820-2915 that came in with fainted green light at MagSafe. It had a short on PP3V42_G3H & PPBUS_G3H. I was able to relieve the short on PP3V42_G3H by removing ISL6259. Now I have solid green light but I still have a short on...
  15. E

    can you use the screen of a A1286 15" mid 2010 to test BRD: 820-2915?

    thanks for the clarification
  16. E

    [SOLVED]A1465 super slow; cursor lags

    Hello everyone, i got a macbooka1465 that lags a lot when you move the cursor. The lagging is so bad that you can see the path of the cursor. is this some related to the gnu or current sensing resistor
  17. E

    [SOLVED] [820-3437-A] Orange light No fan spin - Getting 1v on PPBUS_S5_HS_COMPUTING_ISNS

    F7140 was blown. After replacement, we got a spinning fan :)
  18. E

    [SOLVED]820-3435 no power/dim green light

    1) 3.42v 2) 101.2 Kilo Ohms 3) 4.9 Ohms 4) 12.05 Mega Ohms
  19. E

    [SOLVED] [820-3437-A] Orange light No fan spin - Getting 1v on PPBUS_S5_HS_COMPUTING_ISNS

    [SOLVED] [820-3437-A] Orange light No fan spin - Getting 1v on PPBUS_S5_HS_COMPUTING_ISNS Hello everyone, i got a 820-3437 with no power. I was able to find to find a short on PPBUS_S5_HS_COMPUTING_ISNS. C7324 was the culprit. After re-checking my voltages I noticed that I'm only getting 1.03v...
  20. E

    [SOLVED]820-3435 no power/dim green light

    Hello, I have a 820-3435 that came in with no power. It was missing PPBUS_G3H (0v). After replacing ISL6259 I was able to get a dim green light but still no power. PPBUS_G3H is still missing. any suggestions? Im stuck Thanks,
Top