Search results

Voltage with batt connected no change. Ehm a question first to avoid stupid answers. To read the capacitor on ohm mode. the probes on either sides off the capacitor? R5400/10/20/30 and R5600/10 are all there. no cutting needed :)

3V3_G3H_RTC diode 0.423 (red on ground ) P_IN C7037 5.190 CHGR_AUX_DET R7016 1.289 SMC_RST_IN R6940 0.044 VDDA/P C7077 5.173 EN_MVR R6960 0.000 AUX_OK ?? NC pad? AMON R5472 0.026 (not sure. is...

ah! thnx for the tip. PPBUS_G3H 1.200. Looks to be looping from 1.200 to 0.950 over and over. 3V3_G3H 0.001

No. Takes a few seconds to climb there. With red on ground it’s 0.450. (yes my probes are correctly connected, I checked because I took them of for injection)

got it off, replaced. on diode mode PPBUS_G3H is 2.031

It's C6405. gets dry instantly.... tried to get it off, but it doesn't release. up to 410 degrees now. let the board cool off now first

Yes i think so. Put U9060 back and still 1.500 (climbs there) at L9060. PPBUS_G3H still 0.000

U9060 removed. L9060 1.500 PPBUS_G3H still 0.000

Back from holiday.... L9060 0.000 And still 0.000 at ppbus

I think I’m mixing up a few things. I put my meter on continuity mode, one probe on ground and the other to the L6960. It should not be beeping i thought. On diode mode: L7290 is 0.024 L7230/L7210/L7430/l7410 is 0.006 L8102 is .080 black on ground 0.048 L6960 0.464

Ik remeasured it first. Made a mistake there i think. L6960 on diode mode 0.464. did some short traking on the coils. L7290 short both sides L7230 short both sides L7210 short both sides L7430 short both sides l7410 short both sides L8102 short both sides L6960 short both sides L7670 good...

thnx! that's a problem. yes, 0.000

Hi, i'm new here and a beginner in repair. I've red other topics and tried to do some research already. But i'm stuck what to do next. I got a1932 thats not turning on. no amps are pulled also. This is what i've found. no liquid damage or damaged components. PPBUS_G3H measured. 0V (P_IN )...