Search results

work mentioning, with only the battery connecting the battery to the board. I only get. 50v on ppvbat_g3h_conn with the daughter board I get over 11v i don't have a known good to use as a test point.

thanks, I've tested it and it tests fine. I've checked it with daughter board and battery connected. I get it flactuating between. 02-.01v I've also tested it was only daughter board, I get 0 with daughter board. But when I screw the battery connector screw in it flactuates between .02-.01v i...

Macbook A1708 customer said.. it was working on battery then one day it wasnt. i have replaced the battery with no fix. funny thing is the macbook attempts to turn on after new battery is installed, but it comes up with charge me flashing on screen. i plug in charger, it turns on.. battery has...

No worries, I'll get a new one on order.

Pin 115 has 3V before and after powering on. Pin 114 has 3V before and after powering on, so it does NOT drop to 0V after pressing the power button, if I hold the power button down then it drops to 0V only while holding it down.

Sorry for such a late reply, all the voltages are the same from post #3.

Are they the signals from post #3? Only the intel chipset lightly warms up, then about 30 seconds or so later the power light goes from nothing to solid red. They are the only two reactions it does.

Thanks, tried them both but same results. Could the EC IC itself be bad?

I have found two but they are both pay walls, unless you guys have access to these? :-) LA-C912P R2.KB9022.bin: https://vinafix.com/threads/dell-alienware-17-r3-aap21-la-c912p-rev-2-0-a01.26270/ https://geekdais.com/index.php?a=downloads&b=file&id=4699

When writing and reading back the two files are the same. When writing, powering on the board (does what it does) remove power and read it back, the content is the same but one line is in a different location. I have plugged it the battery and the board is charging it if that means anything. :-)

What should I try next?

I have flashed the 15 R2 rom but there is no difference in the way it behaves.

Access is denied to the drive link, I sent an access request message.

I have sorted out the antivurs issue. This motherboard was already in the config and I double checked it with the schematic and it is correct. I have read/dumped the ENE KBC.

I've got the Vertyanov JIG programmer BOARD V3.2. The seller sent me a link to a forum for the software download however, Windows defender is detecting it as "trojan:Win32/Occamy.C". Link to forum here: https://ascnb1.ru/forma1/viewtopic.php?f=70&t=89694&start=0 Do you have the software for it...

The EC programer has finally arrived, what should I do next? :)

Thanks, it's on order. :-)

This one? https://www.ebay.com.au/itm/Sergey-V...oAAOSwF0NcN3R-

Thanks for the schematic. UE5: pin33, 3.3V pin67, 3.3V pin111, 3.28V pn37, 3.3V pin65, 11mV pin110, 3.25V pin115, 0.0V when off, 3.3V when powered on pin100, 0.5mV pin106, 0.6mV pin114, 3.3V Hopefully I got them correctly after double checking. Edit* PBTN_OUT# I did not notice any change...

Hi, I've seen a few other Alienware Topics here so I hope it is ok? I have an Alienware 17 R3 LA-C912P board which, once turned on, shows no signs of life, no fans, CPU and GPU are both cold, chipset does turn on and warm up as it should. After around 20 to 30 or so seconds the alien head...