Search results

I purchased this board, came fully functional aside from not recognizing battery. Looks clean, no evidence of liquid. U7000 Pin 11 3.4v stable Pin 10 SMBUS_SMC_BSA_SDA moves between 3.4v - 0.15v R5280 2K R5281 2k SMBUS_SMC_BSA_SDA is stable at 3.4v on pin 1 of R5280 while pin 2...

looking like a bios shot in the dark

History is a guess aside from what I see which is lack of corrosion, no real discoloration of any probe points. Trace amounts of fruit punch(?) around the base of C7119 and C7120; highly likely was cleaned before falling into my lap. it arrived naked in a lot which contained several broken...

I get a short blip on mouse led as it powers on. Voltage to ground on PPBUS_S5_HS_COMPUTING_ISNS .295 (.482 on working board)

No traces of liquid or corrosion. ppbus_g3h stable at 8.45v pp3v42 stable at 3.45v and green light present.

Fan spins for a few seconds during which all S0 rails turn on but fall off after stopping. I've tried changing U2700, checked u7000 current sense's. What should I be looking for at this point in terms of ****_PWRGD signals etc. aside from the S0_Mains verified? Questions: 1) When moving...

Got it. I'm done here if you all are. Thanks

I was borrowing an SPI chip from one board for use in another (yes idiotic to begin with) but popcorn'ed it prior to a successful dump. Does anyone have a .bin for a 820-3024 1.6ghz 4gb? Thanks from the past.

I changed the clock chip and solved. I don't understand why heat played a factor on.

BTW... No sign of liquid or corrosion here.

Just power cycles continually until U6100 area is heated, afterwards it will turn on, chime, present image etc. Is it possible I over heated the new SPI chip and is now failing as well? There isn't anything on the other side of the board that's being heated as a result of U6100 targeting as far...

This board started out with quarter fan spin. I noticed that one of the SPI_MLB_CS_L resistors was missing and when replaced the board turned on but a day or so later the quarter fan was back. When heat was applied to the U6100 area the board would turn on so I dumped the rom thinking the chip...

After replacing the garbage poly-tantalum easter-egged cap this board is stable, however... (2) errors in ASD OS... (running on a naked logic board FYI) *TsOP temp. (Palm rest test #1) "SMC could not initialize this sensor" - I assume trips because the palm rest is absent...