Search results

u7100 replaced already, same issue

u7100: 15: bmon: 0.069V 9: amon: 0.208V

g3h is now 8.2 after ultrasonic bath, but still lower than 8.5, its the same 8.2V with or without battery in diode mode, on J6950 5: 0.498V 4: 0.503V

it was liquid damaged around the lcd connector, there is picture but not backlight, i replaced the lcd connector on the board, and the lcd cable, now the laptop works fine but wont detect the battery even a new battery, but the original battery is good too, in another macbook its works fine, now...

hmm, interesting, there is a wine damaged A1278, running 10.13, that is doing the same thing,m wont charge, and says the trackpad is not connected, but the trackpad actually works....

macbook air have a very typical issue, i fixed many of those with this problem , looks u havent got the chance to meet this issue yet... 820-00165 board, one of the the buffering cap C7377 burnt out, taking the G3H F7140 fuse out, very typical issue i fixed those two, and now its in the...

no liquid damage it had a shorted cap near the cpu, and a burnt fuse, fixed, works needs new battery though it wont charge, tried with another battery it works, but i cannot check the show battery status in menu bar, that shows up then right away goes away nad unchecks, and i want to change...

ok i put it in the ultrasonic cleaner, now it works fine thx

yeah, near u4600 the pad was gone for 3.4V, fixed, once it turned on with the apple logo, then off, now it wont turn back, but its charging now, takes 2.5A is that normal that g3h is 12.5V but with the charging the empty battery it drops to 11.7V ?

liquid damage, the SMC side of the board , close tot the side connectors, all over that place, cleaned, doesn't look that bad, when it came few days ago actually it was working fine, now there is green light on charger, takes 0.01A on 16.5V , i replaced U7100 twice, same issue, here are the...

old macbook air, did not power on, the R5001 (which is not actually on the board) was shorted with tweezers, that is U5010 4. leg, and now it is working fine, so SMC_MANUAL_RST_L was shorted with tweezers to GND, what is it doing actually? or it was just random self healing?

on the small board on the lcd 820-00452-05 there is a sliver looking BGA, there was loads of water on it, cleaned it, removed it, one of the leg is burnt and missing, thats it, there is backlight but no picture. Will order new top part

the small board which is directly attached to hte lcd is water damaged, i removed the shield, there loads of BGA chips there, so im pretty sure it is the screen now, Do you think it is possible to desolder the 2 large ribbon cable, so i can throw the small board into a ultrasonic cleaner? or...

do u have the boardview and schematics? i guess j8500 is the lcd connector?

I dont have the schematics and boardview for this, can please someone send it to me? It had a light water damage, around the wifi area and the lcd connector, i cleaned it and it powers on but there is only backlight no picture. The water damage was pretty small area. I got a usb-c hdmi...

finally finished it... -not every image from torrent works, u have to download a few and try them -a new usb 3 usb stick works ok, but many times i had to unplug and change the usb ports to be recognised, once its recognised it will install fine -carbon copy cloner worked fine to create...

the old white crap, a1181, it works fine but hdd is failing, seems that i found a solution now , i downloaded another DMG from torrent, and used another macbook with 10.11 and carbon copy cloner, now it actually started to install it, hopefully can finish fine

now i got a hdd with working 10.6, i can restore an iso what i downloaded from the torrent, i can boot from that usb, and than it says u cant install this os on this mac..... OMG .. does anyone have maybe a an ISO made from an actual 10.6 installation disc? without any modification?

in 10.11 if i open that restore menu, and point to a 10.6 ISO file, it kinda opens it up but the install mac os part is greyed out, so i can go further.... ah , i think i need a working 10.6 to do that

i downloaded the 10.6 ISO from torrent , but now how can i create a bootable usb with that? I ve done that before running 10.6, there is an option in disk utility, RESTORE, but in later osx there is no option like that, only the create medi install in terminal, cant i use that? so im running...