Search results

use asd os maybe boot from known good os, check running temps using istat menus run prime95 and furmark

check battery and charger current sensing

I'm looking for test leads for iphones, 1.external battery charger, charging iphone batteries using power supply 2.leads from power supply to battery connector on phone any links would be appreciated, thanks

solved, faulty image, solved by using different torrent

its like a $20 cable, just replace that piece of crap

id say used would be smart, for me im in perth australia and out of the 50 or so boards that ive had through my shop only 3 were dead gpu

im not sure a cheap station is what you want, my soldering station was a yihua 787 and now i have a hakko FR-810B and a fx-951, the hakko setup was $2000 more than the yihua and the difference is night and day, im sure that the same is true with the cheap and expensive IR rework stations

aw yeah thats pretty smart, id probably just turn off the unit, i rarely get shorts I cant find visually

ah ok, have a look at the smc area

thats a hard drive, the problem will be on the logic board

inline resistor?

i just bought this piece of shit http://www.ebay.com.au/itm/161817979114?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT will see how it goes

;) thats too funny

I just fixed my first a1398 no backlight, replaced J8300 and ran a jumper from pin 1 to an exposed trace and it works, because of you I just made $350 ($270) for 20 minutes work I can't thank you enough for you free content on youtube and for this paid forum, if you start stocking the...

the original problem was no power on either camera so after looking at it i found it was cracked, removed it (u2301) and found that , u2100 was not attached to the board. I will check all the display lines when I have time, no lsd because the screen worked fine before I messed with it, without...

yep done, thanks

oh yeah i forgot to mention you have to use force to pull the old one out, an unreasonable amount of force

go to ebay type the model number folled by what you want A1502 keyboard http://www.ebay.com.au/itm/Apple-MacBook-Pro-13-A1502-US-Keyboard-Retina-ME864-ME865-ME866-2013-/162243482079?hash=item25c67711df:g:dacAAOSw8w1YBXD7 if you see hundreds of results its possible if you see none then its...

I have a hakko FR-810B, it cost me $1000 AUD. I use maximum temp and airflow of 4 for normal use 2-3 for iphone and 9 for when stuff is pissing ma off, changing the temp requires holding a button for 5 seconds changing each number one at a time, nah fuck that, maximum temp, low enough air flow...

check for corroded resistors next to smc, it could be in the wrong mode i am watching this exact video now haha https://www.youtube.com/watch?v=jedTeoBSy08&list=PLkVbIsAWN2lsHdY7ldAAgtJug50pRNQv0&index=38