Search results

resistors measures correct when I check between pin 17,18 and 27,28 at u7000. No liquid in that area

Thanks. What is your thoughts about this? Do you think that replaceing it will fix my problem? I havn’t worked on ipads before.

hope that someone knows what controls the screen rotation. The image doesn't rotate, it's always in portrait mode. I don't think it is software related problem. I have updated and tried everything that I could find on google.

It works perfect with battery. MagSafe does nothing except light green

This board was damaged by wine. Everything works great except that it won't charge battery and it won't start with battery disconnected. I have green light, no orange light. With magsafe connected voltage is changing between 4.2 and 4.6 at fuse F7040

Yes, I know that. Just thought there might be anything else to check

Is it always the slot that is bad or can it be anything else when only one slot is working?

Tried a new battery but no difference. It sometimes worked for 15 min running from only battery. But now i found liquid damage around U6990, some bad traces. Replaced a couple of components and now it works!!

Replaced U9000. Now it works. Thanks again for your help.

When I started working on this board it chimed but had a black screen. After looking at the board i found that C7524 was ripped off so I replaced it. Then I saw corrosion in the lvds area around Q4262. Replaced Q4262, R4262, R4263 (those are for firewire) and then I replaced LVDS connector. Now...

Sorry. BIL works but only when MagSafe is connected

BIL is not working. Battery was 80% and when I remien MagSafe it was 86%. Original battery with 176 cykles. I don't have any other battery for this model.

This board had some water damage but not really nothing visable. But I had to replace the connector for the touchpad on the board because it was corroded. The problem is the battery. It boots with only battery connected but after 30-60 sec it turns off. If I unplug MagSafe when the computer is...

Found a resistor that was knocked of the board. Now the fan is spinning again! YEAH Mark as fixed

Read Comments!!!! It wasn't Duke

yes, will do that tomorrow

Yes, It works fine except for the fan. I think it's 2011. Thought about looking at the schematic for 2936, maybe the circuits are similar

The fan is dead on this Mini. I have tried other fans but none works. Can't find boardview or schematic for this machine. Voltage on connector: 1: 0 2: 3,3 3: 3,3 4: 1,6 (dropping)

replaced U5805 and now it seems to work

yes, without tp connected u5805 doesnt get hot but when tp is connected it goes hot very fast