Search results

This is the first time I replace a keyboard connector. The old one was partly damaged. Now all keys work except capslock. Nothing happens when i press it, no green light on button. The keyboard is new and i tried other with same result. What can by wrong? I checked all connections

Just discovered that the fu€%€&ing battery sensor was liquid damaged. Changed it and now it seems to work!!!

I measured the probe points around U9701 and compared it to a working board and there are some differences. For some reason the pins are numbered on the boardwiev from 1 to 25 but on the schematic its letters and numbers? B4, E3???? First measure is good board. Volt Pin 3: 3,12 / 3,12 Pin 5...

This one keeps trolling me. Still boots with black screen sometimes. Any suggestions?

No luck with new ISL. PPBUS_G3H is 12.29 with adapter. does that mean bad smc? The computer looks and work great except for the battery... sad

yes, I took it from another laptop. i'll replace ISL and see

battery shows 0% but it is actually aroud 88%. It shows only zeros in system report

this one works with charger. I don't get orange light on the charger only green. With BIL connected there is an X on battery, with BIL disconnected I get "Not Charging" 20 ohm at pin 17+18 and 27+28 on U7000

When I check coverage on the apple support page it tells me that I have to validate the purchase date. I bought it second hand and have no recite.

ok, I have 10 days left to do that!!!!

Tried different hard drives with same result. Even tried too both from usb stick, still the same. After the line appears screen goes black for about 3 sec then just white for 15 sec then black 3 sec then white with apple logo again. this keep looping. Same with external screen.

The computer boots but at the apple logo a line appears and then it shuts down. Can it be fixed?

it's not the one in the picture I'm gonna fix, didn't what to post a photo of the one with missing components and ask what was missing

If I knew what components that is missing I could fix it today. My other option is to buy from eBay and wait 30 days. I have a lot of magsafe boards in stock but not this one. Why is there no schematics for these?

Can anyone tell me what the two white components is closest to the magsafe connector is? It's for a 2010 13" air. I am trying to fix a board and these two are missing and I can't find a schematic.

Tried lcd number seven now and it works! Don't know why because all the other lcd I tried works. Close this thread

If I disconnect battery and magsafe and do SMC reset? by holding down power button 5 sec and then plug in magsafe while still holding down power the screen works. then I can turn it off with power button and on again and it still works, and fan is spinning high. But when I disconnect magsafe an...

pin: 8, 9, 11,12, 14, 15, 17, 18 all measures 0,440. checked my other MBP with the same working board and it measures 0,359 at all pins

I have tried other lcd assemblies.

When the screen works it goes black after about 5 minutes