Search results

Removed the board and checked, The PPBUS_G3H has 2 ohms resistance with respect to ground. But couldn't understand who is causing the short. And the current consumption of the board is 20V and approximately 40mA (May is not accurate)

I have also found this extension cable on the web, Does anyone tried before me this cable for modifying an existing broken cable? https://www.aliexpress.com/item/1005001860231489.html?spm=a2g0o.cart.0.0.28393c00KXqba3&mp=1

Hi , I have two laptops with display flex gate issues, It behaves weirdly in particular lid angles. I have found some youtube videos people are extending the cable using additional flex cable. I was just wondering if anyone knows where I can buy this cable for extension?

Now the board is not turning on anymore, No chime sound... No display, Does it went bad

Yes, it is the problem with the display.... Its working with other displays

Is there an option I can fix it ? What is ALS??

It must be 820-00239-09, But I don't see a keyboard backlight, But the keyboard is working. The touch bar is not working at all, I mean no response no backlight.

Hi, I have replaced the display panel, Not the full display assembly but just the panel alone, I don't know the reason. The board boots perfectly, It passes the diagnostic test without any error. But the touch panel is not glowing. Some history:- While removing the display I have disturbed...

Yes the o/p has connection to the feed back pin of driver IC

Can you please review mine? And what is the purpose of this XW7720, What is this exactly?

Yes earlier I had 8.5V , that was before fixing the feed back issue. I have also changed the driver IC . Fuse is good now

I have made a connection from the xw7720 n via to D7701cathode. When I connect the screen I get 0V at o/p, Still, the display image is there. But Q7706 is not turning ON. Q7706 gate has 8.2V. When I check Q7707 Gate - the 5th pin is 0V and the 2nd pin is 3.3V.

I am sorry, I didn’t understand that picture, could you give me bit more information?

Look at the feedback pin and the missing pins, I think its an impossible task to solder the missing line ,

I have inspected the entire board couldn't find anything suspicious, I don't know how to proceed now.

Voltages at diode mode with respect to ground Without display - 0.610V and 0.417V With display - 0.607V and 0.416V

I had 8.5V at the boost circuit output, I have changed the backlight driver and wired the missing feedback line. When I connect the feedback wire input fuse is failing, Not sure why. I don't see any short at output

It is not happening always, it's happening when I keep it long time in cupboard. Something related to temperature I think. Will display performance impact depends on temperature? Yesterday whole night laptop was outside and it was ON. Today I don't see this flickering anymore

Forgot to tell, I was changed the battery, did I screwed the display because of pressure on it?

Please find the attached video link, I don't know why it is flickering intermediately. Did anybody faced this issue ? I have checked with external screen but I can't see flickering in the external monitor but the internal one is flickering...