Search results

mmm yes.. value is 01.5 ohms y mode diode to ground 366 I don't have another board I need remove F8400? can I inject 1v ? thanks for all

If I have the logic board removed, just on the table short value 09,2 ohms big coil all good

Hi guys, I have this board and when checking the fuses I have been able to observe that F8400 is correct but I have a short to ground in PPBUS_G3H I need help finding the component thanks

sorry I don't cheack all secondary power supplies i have short to ground at line PP12V_S0 and 12V_S5 drop to 6v 5v etc.. change Q8110?

ok thanks!

Hi, I have this motherboard that stopped working with the keyboard and trackpad. We have tried a new keyboard, trackpad and TP flex but nothing... J4813 4 PP3V42_G3H=3,4v Check F4800 is good L4803=591 value mode diode If the keyboard works for an SMC reset but I can't do a PRAM reset

hi all, I have this board with a power problem, I connect the power cable and LED1 ON, I press the power button and LED1 turns off and when I release the power button it turns back on. It seems to have a short to ground. I have tried another power supply and same problem problem GPU or CPU...

sorry I don't see ur post some voltages PPBUS_G3H = 12.54v PPVIN_G3H_P3V3G3HRTC =12.54v PPVIN_G3H_P3V3G3H = 12.23v PP3V3_G3H_RTC = 3.35v PP5V_G3S = 5.10v in dfu mode error 4045 / 4042 - Timeout error. Bad SSD will also cause T2 to power cycle its power supply every 20 seconds. this wont...

sorry I already know forever PPBUS_G3H=122 value "3 CHGR_ACIN=0v" Fix this first... I try this, thanks ! I changed U7100 and C7111 now I have 4.3v in CHGR_ACIN but I lost voltages pin 19 and 20 new voltages: 1 CHGR_AGATE=15.30v 2 CHGR_DCIN=16.10v 3 CHGR_ACIN=4.29v 9 CHGR_AMON=0.01v 12...

Diode mode to ground at PPBUS_G3H= 800..900.. 1200.. 1900.. out range resistance all scale out range except scale 200M 00.8 ohms U7100 1 CHGR_AGATE=15.30v 2 CHGR_DCIN=16.10v 3 CHGR_ACIN=0v 9 CHGR_AMON=0.01v 12 PP3V42_G3H=3.39v 13 CHGR_RST_L=3.35v 14 SMC_BC_ACOK=0v 15 CHGR_BMON=0.03v 17...

Hi, i have this board with liquid damage in the keyboard area but it seems I haven't found any corrosion/damage on the board some voltages: PPBUS_G3H 0.59V PP3V3_SUS 0v PP3V3_S0 0v PP3V3_S3 0v PP5V_S0 0v U5110 1_ 3.39V 3_ 3.39V 4_ 2.72V 5_ 3.34V 6_ 3.37V 7_ 3.39V 8_ 3.26V thanks for all

Sorry, does this require a new program or can I try another board?

niceeeee !!! thanks thanks ! solved ! the problem is Q8450 I was able to get this IC from a MBP 2011 and everything was solved thanks for all !! :)

pads of R5115 there? in SMC_ONOFF_L yes 3.3v

PM_PWRBTN_L=3.38v constant, no pulse drop

I don't have another 2015 board, can we go another way? I've seen no voltage at any time in L7110/30/50 Is it true that the coil resistance is normal 01.0 and they seem to be good So I don't understand why there is continuity to ground On L7100 I have voltage 1.9v increasing very slowly

The track is fine, I already checked, sorry I was confused, there were two boards and it measures the opposite pin SUS_PGOOD_CT thanks

nice I don't have pulse but I have short to ground resistance L7110 REG_PHASE_CPUVCC1=2.5ohms scale 200