Search results

yes but I have problem with 3v3_s5 R5590 1 PP3V3_S5=3.30v U8130 1 PP3V3_S5=0.20v <---- why? 2 PP3V3_SUS=3.30v

For the repair I only have i/o board with flex data and fan connect R5170 is bad, change now I have SMC_ONOFF_L=3.39v but any led with charger genuine neither power or fan in smc bypass mode

nice !! thanks only with reball SMC now I don't have short but I don't have led green or orange new voltages U5110 1 PP3V42_G3H=3.40v 3 PP3V42_G3H_SMC_SPVSR=3.40v 4 SMC_MANUAL_RST_L=2.71v 5 SMC_RESET_L=3.36v 6 SMC_LSOC_RST_L=3.38v 7 SMC_ONOFF_L=1.21v 8 PP3V3_S5_AVREF_SMC=3.26v

history all right until last week it turned off and did not turn back on. u speak about PLT_RESET_L? PLT_RESET_L=0v with/out pulse

hi all, I have this board, connect power led1 green, pulse power button anything... PM_PWRBTN_L=3.38v pulse SMC_ONOFF_L down to 0.10v PM_SLP_S4_L=3.28v pulse power button same voltage no change PM_SLP_S3_L=3.28v SMCBAD ? thanks for all

In these areas, near U7090, U3090 and U5000 on these sides, I have doubts about securing the components.

I have injected voltage 2v with 0.04a nothing.. but up to 2,8v and the short to ground has disappeared, value to ground 160 change 340 change 160 10/15 second again short to ground.. value 019 mode diode and resistance now 21.4

Well, please excuse me, I was going to take these steps and suddenly the computer turned on (maybe because it was without any power supply all weekend) The same thing happened to it about a year ago, but on that occasion it only took a day to work and we thought it was overheating. Thank you...

PP3V42_G3H with short value= 02.3 ohms (scale 200) U7090 PPVIN_G3H_P3V42G3H=15.57v thanks

hi all, I have this board with liquid damage, it has been cleaned and does not appear to have serious damage. I have changed U5110 but without success because I have short to ground in PP3V42_G3H Some measures PP3V42=0.17V PPBUS_G3H=0.22V PP3V3_S0=0v PP3V3_S5=0

PM_SLP_SUS_L=0V SMC_ADAPTER_EN=3.36V PM_DSW_PWRGD=3,39V PCH_DSWVRMEN=3.28V PM_BATLOW_L=3.29V PCH RTC Signals: PCH_INTRUDER_L = 2.99V PCH_INTVRMEN = 3.18V PCH_SRTCRST_L = 3.28V RTC_RESET_L = 3.28V

diode mode to ground L7560 1 P3V3_S5_REG_L=369 value 2 PP3V3_S5_REG_R=369 value

sorry I check again only mistake is right 3,26V copy the tests from another board with the same fault

hi i have this board with magsafe led green led orange but no power or fan spin. Either power in smc bypass mode PPBUS_G3H = 8.53V PP3V42_G3H = 3.39V SMC_RESET_L = 3.36V PP5V_S5 = 4,97V PP5V_S0 = 0V ALL_SYS_PWRGD = 0V PP3V3_S5=3,26V PP3V3_SUS=0V U7501 23 = 8.53V 22 = 3.26V 12 = 3.39V 13=...

nice, it already works perfectly, third time's the charm... bad luck three times damaged IC from different logic boards Thank you and sorry for causing so many problems

U5110 1 PP3V42_G3H= 3,39v 3 PP3V42_G3H_SMC_SPVSR=3,39v 4 SMC_MANUAL_RST_L=2,74v 5 SMC_RESET_L=3,33v 6 SMC_LSOC_RST_L=3,38v 7 SMC_ONOFF_L=3,38v 8 PP3V3_S5_AVREF_SMC= -0,13 (Using the positive tip of the multimeter the negative symbol appears)

hi guys ! I have this board with some liquid damage in the image area. I have purchased and the components seem to be fine but the equipment does not turn on, nor is it detected in DFU. With the right USB ports you don't have either Any idea where I start? What measures do they need? thank you...

ah sorry I don't understand u... value=806 thanks

Does this mean that this second IC U5110 is also damaged?

continuous with 0v, even in smc bypass mode