Search results

legend. now booting. looks like it is working now. gmux reflow solved issue.

I know these boards have issue with c9560 however even after replacing with a bigger one. I am still getting kernel panic. measures 1.3v Initially when i touch the probe though i can see for like a split second it reads 3.3v?

ahhhhh i see what you are saying. thanks informaticos

.7ohm pm ppbus_g3h

Hey informaticos i started with lower voltage with no success so i went up until it got to 8. i will test tomorrow mornign and report back

hey guys. this one came from another store and there has been a previous repair attempt. I only noticed because L7210 was missing I have no other history and suspect no prior liquid damage. ppdcin_g3h has 20v present but both ppvbat_g3h and ppbus_g3h on F7040 both showing 0.6v. I removed F7040...

1.4mV :eek: on pin 9?

I'm sorry I meant to say I measure everything you mentioned in previous post.

Amazing work. great share. Thanks Louis

everything look good cant check for pin 9 as i got no oscilloscope.

oh ok. i did change smc.

[11/08/18 22:44:16] Thermal Interface - Processor:Processor0: TIM Test 75 percent GB (test #4) - TIM Test 75 percent GB - Check that CPU heatsink is properly attached, using product spec thetadh+ 75 percentguardband. [22:44:46] ERROR - -47006 [Processor power error] -- TEST FAILED thatsthe...

Hey guys. system works good. however on asd im getting error 47006 i checked all resistors around smc and even checked under smc. everything look good but still getting error.

yes it does.

hey guys Suprisingly very clean board. The one and ONLY problem i have spotted is one of the traces is corroded - deep. DP_T29SNK0_ML_N it connects to pin 2 of C3623. If you look on the board view all the caps located in the same area are taking 3.3v on the pin 2. Would it be a problem if i...

1.11v measured on ppvcore_s0_cpu

Just curious why its good to run with battery? should boot with one without right? Anyways I threw it into a working case and no chime, no display. fan still spins. I put under thermal cam and u1800 seems a little hot. its around 60-70c I know the cpu's do get Real hot on these but not sure if...

changed isl now fan spin green light ppbus 12.68v i will check in machine and report back. thanks john

Thanks Paul

both look good. what is the point of having a 0 ohm res?