Search results

yes 33hom

all look fine

PPBUS 12.3v AWAKE/SLPS2R all good. all LDO looking good. no SSD voltage no short not enter to DFU

no

i was do everything..change all(LCD cable,wipe and restore,put in a good know body) this is someting with the board.. J8500 compare to a good board: MIPI_FTCAM_CLK_CONN 480- (gboard)720 DP_INT_HPD 480-720 I2C_ALS/SDA 510-610 1.8v on both PP5V_MAIN_ALSCAM 5v

All SLPS2R and AWAKE voltage pulsing from 0.5v to 0v dont get voltage on G3S lines..

3V3_G3H_RTC 3.4v stable

yes its 12v stable

suddenly dead. 5v 0.4a on charger ppbus pulsing 12v-10v every 1-2sec. not enter to DFU. didnt see any short on board.

water damage just on U9300 was replaced it and few the compnents around and few jumpers. PPBUS 9-12v pulsing all the voltage around U9300 pulsing 70%-95% off they corrent voltage. charger 5v A pulsing A1.2-0.2

C7050 W/W.O battery 0v no short

without battary: PPBUS_G3H - 0.3v 3V3_G3H -3.4 with Battary: PPBUS_G3H - start at 10v and down to 1v and pulsing from 0v to 10v but usualy stay at 0v 3V3_G3H -3.4

big water damage, was clean all,bypass smc not working, replaced U5000 with good know, replaced UB300/400 also U7000 and Q7030/40 fan spin for 2sec then off, SMC_USBC_INT_L 3.4v stable. SMBUS_SMC_4_G3H_SDA\SCL 3.4v SMBUS_SMC_3_SDA\SCL 0v all diode mode around U5000 are good. NO voltage on all...

2.3 on both

Yes,and also the time of full charging...its very wierd..

yes its tight i was chacked 100times:rolleyes: i was the obvious one but unfortunately is not .. and the light indicator is blinking(dont know if its should be like that)

820-00244 working ok the battery is recognized on the OS charging sign ok, even i can see the cycle count, i was try with 2 good know battery but the same. when i take out the cable its shot off.

just replaced the U8100

so i was replaced.. 5v PPBUS_AON 0.6v 150 PPVBAT_AON_CHRG_REG 500

U8100 was short(cracked) can i take from good know board?