Search results

Yes i am sure. Re-Checked.

I will try and revert back to you in sometime

Replaced that one too. Still didnt detect. Have returned the unit as the client was getting impatient

Not pulsing in SMC Bypass. PPBUS at 8.1V

i am getting 1.8V at pin 48

Which CD3215? Have already replaced one as mentioned before.

Last ditch effort of changing CD3217s ?

Replaced UF000. Still same issue. Amp meter pulsing. Basically its not charging the battery and is stuck at 5V

Tried Jumper. SOC_FORCE_DFU goes upto 1.8V. still doesnt detect. Wifi IC was shorted. Removed it. Main issue still the same.

41 - 12.6 voltage 42 - 5.1 voltage 48 - 0.152 voltage

U8180 PP3V3_S5 is pulsing 0.5V to 3V. And other are 0V. Replace U8180. Still the same.

No.

L7270 is 0V L8100 is 1.2V L8102 is 1V

L7270 is 0V L8100 is 1.2V L8102 is 1V

One port at 5V 0 amps and the other at very little amp draw. PPDCIN_G3H also missing in the 0 amp port. Replaced Cd3215 now both port exhibiting same behavior. ppbus at 12.3v but not detecting in DFU. G3S lines are 0V with no shorts. 5v/3v3/1v8. P3V_G3h is present. SLPDDR voltages around...

L7210/20 are 0V.

L7210/20 are 0V. Small spikes to 0.1V but majorly 0V. BAD CPU?

No.ALL_SYS_PWRGD didnt go up. All of R8164-8 are removed at this point. PM_SLP_S3_BUF_L is 0V - no shorts

So on thermal scanning UF000 was heating up accordingly with the amp meter pulse.

Pulled SOC_FORCE_DFU to 1.2V via jumper from PP1v25_s2 still not detecting in AC2. It will only run on a charged battery and not on only charger. AMP Meter Reboots every 2-3 seconds on both ports. and not detect in USB. i think issue with the USB C ports maybe?