Search results

The coil. Now I have 12.60V

You mean DATA and CLOCK?

A1369 2010 what board is? 2011 is 820-3023 So I can compare

I replaced ISL6259 and same thing. PPBUS - 0V

I did a jumper to U6101 as 3V was missing and now they are stable always. Do you think replacing SMC will solve the problem with no video or this is another problem? I have all rails and CPU rail appear for 20 seconds and then goes to 0V. Any idea here?

In my first post I said ppbus - 0V

DCIN?? Voltage on pin 27/28?? ALL on 18.43V

This board work well with battery and show 29%-28% and goes low. Only with adapter ppbus - 0V. No short there. pin17-18 and 27-28 are 3 and 20 ohm. VDD on ISL6259 are 5V acok - 3.3V Next step is to replace ISL6259?

i resolered U6101 again and now I have all rails and CPU rails too. PPBUS - 8.18V No video, no mouse. Reflowed SMC 8.18V means bad SMC?

I mean if I replace complete assembly. 2010 and 2011 different?

This Macbook pro has this problem: http://static.yoreparo.com/imagenes/subidas/1760763-Captura.PNG I replaced HDD and hdd cable 2 times. Mostly it works, but sometimes appears this circle. What I can try more?

All screen for A1369 are interchangeable? 2010 and 2011 models?

This is not Macbook. This is Dell, but if somebody know the problem. Start with no video, but if I plug external monitor and unplug, then video appear on lvds. Any idea?

No Title

No power cycling. Cannot see nothing on S4 rail. traces and resistors are ok. Only chip Select (/CS) on BIOS pin 1 is in 0.30V sometimes goes to 1V Should be on 0V or 3V?

Found little corrosion arround Bios PP3V3_S5 - present 32khz PCH present PM_PWRBTN_L -3V PM_RSMRST_L -3V PPVRTC_G3H -3V RTC_RESET_L -3V PM_SLP_S5_ L -0V PP5V_S4 - 0V missing Checked resistor arround bios and are ok. Corrosion was very very little. I lift U6101 and clean and resolder again...

Yes, same issue.

What? Board is lke this https://ae01.alicdn.com/kf/HTB1aU1vJpXXXXbSXVXXq6xXFXXXm/661-6626-For-font-b-MacBook-b-font-font-b-Air-b-font-font-b-A1465.jpg

Liquide yes. When All_SYS_PWRGD is present that mean all is ok except cpu core??

820-3115 I have 1.05, 0.9V, 1.50V stable but missing PPVCORE_S0_CPU All_SYS_PWRGD is present - 3.24V When All_SYS_PWRGD is present that mean all is ok except cpu core??