Search results

Did ultrasonic cleaning and now back in normal. Thanks a lot for helping me to solve the problem.

I am so surprised that now PCH_DSWVRMEN=3.2v R1450=330k, PPVRTC_G3H=3.3v thanks.

PM_SLP_SUS_L= 3.3v SMC_ADAPTER_EN=3.3v PM_BATLOW_L=3.3v PCH_DSWVRMEN=0v PM_DSW_PWRGD=3.4v Thanks.

My G3H, ppbus_S5, ppdcin_g3h isol, ppdcin g3h, pp3v42_g3h, pp5v_s5 all are ok and pp5v-s4rs3 is 0v and pp5v_s0 is also 0v ( I checked double ). I am not saying pp5v_s4rs3 comes from U7501 just mention that PIN2 (V5SW) of u7501 is 0 V. THANKS.

Resistance to ground on L7520 is 1M and there is no corrosion on J6100. The board came as cleaned no visible corrosion.Thanks.

All power rails present except PP5V_S4RS3 0v AND PP5V_S0 0v Unable to get the datesheet of TPS51980A and pin2 is 0V. It was water damage. Any help please?

my display has liquid damage , power cable burn , jump the wire and now working. Thanks for helping.

i got the following errors: 1.Temparature ( TC0D), ( TC0P), ( TM0P), ( TH1H), 47006 ( PROCESSOR POWER ERROR ), INVALID WAKE EVENT ERROR, ERROR ENCOUNTTERED ON WAKE FROM SLEEP ETC. Thanks

I couldn't find the EFI ASD 3S148 , any body knows how can I get it?

I don't have other display.

I changed C5511 , no luck. Why the smc's PID sensor check has been tripped? Anybody has the ASD EFI 3S148?

with LCD connected LCD_BKLT_EN is 0V and BKLT_PLT_RST_L is 3V.

both are 0V . no LCD connected. Thanks.

both are 0V

820-3332-A No back light, Video yes. - BKLT_EN_L - 0V - BKLT_EN_DIV - 12.2v - F9700 is fine and has 12.6V on both sides - PPBUS_SW_BKLT - 0v - BKLT_EN - 0v - 5V_S0 not present - D9701 Pin 1: 0v - D9701 Pin 2: 0v - Pin 1 of LCD connector has 0v - R9753 and R9757 are both good and have...

820-2936-B ASD error code is " The smc's PID sensor check has been tripped." what to do?

and still has the same error like too slow

The smc's PID sensor check has been tripped."

sorry for late answer, my ASD was corrupted.

The smc's PID sensor check has been tripped."