Search results

The battery did not pass the presence test, there is no other problem. I think I should try it with a different battery. ?

C5220 : 3.4 OHM C5260 : 5,2 OHM

were you able to check

hello, Is it possible to disable the graphics card in the imac a1418 model and use it as uma?

Hello, I hope you are having a good day. the device came to the service due to liquid contact. When I received the device, it was running on battery, the keyboard was not working. There were liquid contacts on the motherboard. I cleared all of these. I changed trackpad flex. I changed...

I replaced u7000. The device was turned on. However, it drew a current of 4-6 Amperes and burned. Now I changed it again. The device turns on, the orange light is on, but it does not draw any amperage and does not charge. It just turns the device on. 0.0 Amp

The device does not turn on. I tried with a different battery. orange light is on. It stays at 0.04a amperage =PPBUS_G3H: no voltage PPDCIN_G3H_CHGR : 20v

Yes

The CPU area is very clean, there is no liquid damage in the CPU area, are you sure? C3405, C3400, C3306 were rotten, I took them apart and haven't put them back yet. If there is something under U3100/3200, will there be such a problem?

I tried with another ssd, do I need to try again? As I said, there was liquid damage and the 3 parts I wrote about in the type-c area were rotten. Do I need to try again via USB?

Sorry can you try again

https://drive.google.com/file/d/1Iq-iD12u98FA6ZzdPBF13hg5tv3dbvxR/view?usp=sharing https://drive.google.com/file/d/1weSk-5P8ugYovRaRnUsVN51JrkiCsWY8/view?usp=drive_link https://drive.google.com/file/d/1F8RzR9pDR_1Tes0fPm4Fg8Gjbn87Ji3o/view?usp=sharing

https://disk.yandex.com.tr/i/Tp4DakgWdWgzuw https://disk.yandex.com.tr/i/7zly8g9CFlgrug

Hello, A1708 820-00840-A device had liquid damage. C3405, C3400, C3306 I disassembled them. The device is turning on and charging. However, when I open YouTube or visual sites, it freezes, the screen turns black or crashes. Is this problem related to U3100/3200? Where should I look? I...

I don't have another card, don't you have it?

Hello, I'm reading a 15 ohm reading on the PP1V1_S3 (L8100). and the buzzer goes off. Could it be a dead CPU?

nothing changed. There is no voltage

There is a pulse on pin 7 and no on pin 3 SMC bypass mode. won't open There is a pulse on PM_SLP_S3_L

RTC_RESET_L : 3.3 Volt PCH_SRTCRST_L : 3.3 Volt PCH_INTRUDER_L : 3.0 Volt PCH_INTVRMEN : 3,2 PM_SLP_S4_L : I see pulse on PM_SLP_S4_L when I trigger SMC_ONOFF_L. Sometimes it goes up to 1 volt