Search results

verbose

The device passes the test but does not turn on. I tried unplugging all the cables. Could this problem be caused by the video card? AMD

820-00045 Yes PP5V1_S4SW : 5 volt PP5V1_S4SW_CC1/CC2 : not stable; it fluctuates between 0.80V, 0.90V, and 1.1V. u7860 Is the u7860 faulty? If I jumper between PP5V1_S4SW and PP5V1_S4SW_CC1 will it work? Will it work if I connect PP5V1_S4SW with PP5V1_S4SW_C? :)

"The voltage value on pins 2 and 52 of the J4700 is not stable; it fluctuates between 0.80V, 0.90V, and 1.1V. Shouldn't there be a constant 5V here?"

By the way, I tested it using a USB-C to USB converter.

The device is charging, but the USB is not working. The USB voltage indicator does not light up at all. I tried using a flash drive, but its light is also not turning on, indicating that there is no USB 5V power. Where should I check next? I have already tested the DC socket and the intermediate...

hello, Battery is not installed. It draws 0.11 amps, then enters a continuous loop drawing 0.0 amps like this. The PP5V_S0 voltage fluctuates between 5V intermittently. It consistently behaves in this manner. PP3V3_G3H : 3.3v PPVRTC_G3H : 3.3v PP5V_G3H_LDO :5v PP5V_S4: 5v

PM_BATLOW_L : 3v PCH_DSWVRMEN: 3.2v PM_DSW_PWRGD :3,4v SMC_ADAPTER_EN :3,4v PM_PWRBTN_L :3,4V PPVOUT_S0_PCH_DCPRTC: 1,5V PPVRTC_G3H: 3,3v PM_PWRBTN_L : yes it drops as soon as i trigger it

hi, not poweron 0,02a stay P3V3SUS_EN: 3.3V PP3V3_S5 :3.3V PM_SLP_S3_L : NO voltage PM_SLP_SUS_L :3.3V PP3V42_G3H: 3.4v

I have it on the donor a1706, can I use it? both sides are same PI3USB32224BXEAE you didn't say anything about it

"I replaced the CD3215C on it with CD3215B. Will there be any issues? Also, these chips don't have any firmware on them, right? Because I installed a brand new product I bought from AliExpress."

hello, I have an 820-00840-A motherboard, and there is no liquid damage. During my initial checks, I noticed that U3200 was getting hot, and I realized that there was a short circuit in the PP3V3_UPC_XB_LDO line. I replaced U3200, but then I noticed that PI3USB32224BXEAE was getting hot. I...

sorry :( PP3V3_G3H_RTC : 3.3 Volt

pin 11 : 12.30 Voltage pin 10 : 12.30 Voltage pin 13 : 5 Voltage pin 5 : 0.8 Voltage

U7100 getting hot with R7101 in place. It draws 0.08 amps. R7101 draws 0.01 amps without

diode mode PP3V3_G3H_RTC : 0.414

No liquid damage. T2 is getting a little hot. :( It draws 0.08 amps. PPBUS_G3H : 12.30 Volt PP5V_G3S : No Voltage PP3V3_G3H_RTC : No Voltage

"When the device first arrived, it wouldn't turn on. We put in a new battery and it worked for 10 days. Today, it came back because it's not turning on again. When I checked the F7000, the diode mode showed 0.20. I injected 3 volts from the outside, and there was no short circuit. I measured it...

The u8472 is punctured I think. u8472 pin 1 was showing short with gnd. I removed the u8472 and r8455. R8455 pin1 short circuit Is u3900 faulty?

PP1V1_SLPS2R : 1.1 Volt PPBUS_G3H: 12.29 Volt volts coming and going. There is voltage for 15 seconds, then there is none. Then it comes again Both USB-C ports have the same behavior? yes u3200 region a little warm