Search results

yes, I removed them all! I have no pulse on the L7260

nothing friend! I removed the components you mentioned and the same thing! this board is crazy! When in doubt, I changed the R7267/68 or u7200 again

I found something strange! R7267/68 that I had tested, now they don't go up to the correct value. They stay at 5k, so replace both. They were OK, I put the charger to test, it didn't work. They went back to 5k.

I had already checked these components, all ok. The R7367/68 would be the R7267, right? all ok L/Q7260.

I removed the jumper and the R7978. PP5v_s5 floated again and the L7260 is 0v

Yes, the two stable lines with the jumper

No history. Some oxidation spots, which I've fixed and tested. Nothing line related. Yes, I only tested the board. With a short between 1 and 6, the PP5V stabilized.

Line PP5v_S5 and PP3v3_S5 floating 0 to 3v, I looked for a short on the secondary lines, I did not find it. I tried to change the U7200, without success. It didn't work with SMC bypass, it didn't work! Stable PPBus at 12.6v. SMC_PM_G2_EN is floating

Thanks with the help!

Sorry, missing information. Coil voltages and diode mode - L8100 - 1.2v / 0.216 - L8102 - 0.9v / 0.089 - L7410 - 0v / 0.003 - L7430 - 0v / 0.004 - L7210 - 0v / 0.008 - L7230 - 0v / 0.007 - L7290 - 1 / 0.018 - L7030 - 12.4v / 0.457 - L6960 - 3.3v / 0.418

No error in DFU mode. It completes the revive and restore process. I have the S5 line voltages

Board is perfect, no oxidation or short. It has 20v and draws 0.2a from the source (without battery). Trackpad has click. In DFU mode, I tried Revive and Restore, both complete without error and Configurator gets padlocked. Audio card is perfect, but I tried to connect with it disconnected, it...

I figured it might be iGPU. Thanks a lot for the help.

Monterey installation was to get the firmware updated again. Tried with external SSD with El Capitan and High Sierra (Mac shuts down when loading system), Catalina (system starts and hangs on user), all with internal SSD disconnected. Yes, I used BIOS clean ME. The system works in safe mode...

Plate is perfect, I didn't find any oxidation. I've tried it and without success. - I put the board in another topcase. Discarding trackpad and cable, I/O board. - replaced the SSD - reinstalled system - tried with external SSD - I changed the BIOS The strange thing, when I changed the BIOS, I...

Yes, I have 3.3 in both lines.

PM_SLP_S4_L does not pulse

Meter does not change and PM_PWRBTN_L pulses when I activate SMC_ONOFF.

the board no longer pulls 1.8a. A similar Mac came in to change the battery, I took the opportunity to compare the coils in diode mode. Little difference, an example: the good board the L7211 appears 0.003, the bad board 0.007

I already tested it, it doesn't give any signal