For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
R7101 & R7104 measure correct resistance, and 4.9v
CHGR_ACIN voltage divider is working; ~1.2v
G7 has power, but no ACOK signal and no short.
Please tell me that this is not a bad ISL :(
I left this alone until now, and it seems to have gotten worse while sitting. It works fine when the IO board flex cable is unplugged. Once I plugged the IO board in, it does the following:
I can hold the option key to get to the boot menu, however once I get to the boot menu the internal...
I hope not, that chip is BGA and over $30 new. So if the chip is getting power on H3 and H7, and CHGR_ACIN is high, should I get SMC_BC_ACOK? I see a few pins that also look like enables, so not sure.
Ok I hooked PPBUS_G3H to the power supply and turned the power supply on, but it didn't draw any current. So I turned it off and measured again and the short had gone (.33v drop). WTF? So I put the fuse back and there still is no short to ground, but PPBUS_G3H is still 0v when I plug it into the...