(347) 552-2258 [email protected]

Search results

  1. Y

    820-3332 OS X loading

    820-3332 OS X loading and never finish to load. Any idea? I already checked gpu controller 2 times and same problem.
  2. Y

    820-2936 work only with HDD. Not with SSD

    This macbook 13" 2011 work only with HDD. With SSD will not boot. USB SSD is detected but SATA SSD is not detected. With new cable same problem.
  3. Y

    Need firmware for Mac Pro

    Have a Mac Pro 2008 that I need to install Mojave. Is there a solution to be compatible with Mojave? Firmware or some change?
  4. Y

    iMac GFX card 2010 to 2011

    I have a gfx card from iMac 2010 21.5 and I want to make it work on 2011. Is that possible? Flashing bios?
  5. Y

    imac 27 2015 late

    This board power but only 2 leds on board. Any common problem here?
  6. Y

    imac 21.5 slim boards

    How many different boards there are for iMac 21.5 slim 2012-2015? Some of them are interchangeably?
  7. Y

    Update EFI to support APFS

    I have several Macbooks with preinstalled SSD with High Sierra. But they are 2013-2014 models and on them never have been installed High Sierra. So I need to update EFI so they will be able to run these SSDs. Now what I do is install High Sierra from USB drive and after that they are able to run...
  8. Y

    820-2915 no power

    This board wont power. No liquide damage. Boards look good and SMC zone perfect. ppbus 12.56V scl and sda - 3.3V smc_adapter_en 3.3V 3V_S5 - 3V 5V_S3 - 0V RTC 32Khz present Next on check? Already checked carreuly the board and cannot find any corrosion. No history
  9. Y

    create DMG on Higt Sierra APFS

    Is there any way to create DMG file for Higt Sierra formated with APFS? I alwasys use DMG for Sierra and Capitan, but cannot create DMG for Higt Sierra apfs.
  10. Y

    Alt pressed 820-2936

    Very stranged case. This macbook pro comes to me because sometimes when power on the macbook it goes to boot menu and in OS X appears simbols that normaly appears when press ALT+some key. Keyboard was durty and I thought it is keyboard issue and I repalced the keyboard. Tested and work ok, but...
  11. Y

    Batteries A1502 2013 and 2015

    Part numbers are different but they seems to work ok. Somebody detect problems when interchange these batteries?
  12. Y

    A1708 replace keyboard

    Replace keyboard is same story as A1502? Same job and same screw I can put?
  13. Y

    820-3332 battery stays at 15% several hours

    This macbook has faulty battery and I replaced with "new" chines battery. Sometimes it stays at 15% and later goes to 100%. It is bad battery or could be some mosfet also?
  14. Y

    216XJBKA15FG worht to replace?

    216XJBKA15FG worht to replace? Comaptibility chip?
  15. Y

    A1425 shutdown after 2,3 minutes

    I tried only board and same story. Can I try something like bios or it is trashed?
  16. Y

    Cannot save data from working ssd

    I want to save data from working ssd belongs to macbook air 2012. Macbook air is trash but I have another one 2012 and I took ssd from broken one and put it to the working one. Blonking folder So I started the working one with usb drive and now I can access to the ssd with the data but in the...
  17. Y

    820-00163 gpu problems

    I have this board that power but lines on the screen. I tested on hdmi and also lines. Replce the GPU is the solution?
  18. Y

    820-3332 will not wake from suspend

    A1398 if suspend need to force shut down. Any test I can do?
  19. Y

    Gfx card 2011 to 2010 black screen 30 seconds

    I took a broken card from 2011. I replaced the GPU and want to test. Don't have Imac 2011 27 and I tested to 2010 27 but it takes 30 seconds ​​​​​. First black screen and then after 30 seg it appear the desktop. Later work ok. Is that normal?
  20. Y

    820-3115 ppbus - 12.28V

    820-3115 ppbus - 12.28V SMBUS one line at 3,4V and other line at 1.04V Pullup resistors are ok. I interchanged them I already replaced SMC 2 times ISL 6259 1 time Have no more idea where is the problem...
Top