Search results

Hello guys. Please I need help with a 16-inch 820-02100 board. The Board was working but would restart immediately after the OS started to load, it is the same thing when I try to press and hold down the power button to access recovery, I tried to restore the device in DFU MODE on multiple...

hello guys I have got an 820-01041 with backlight issues. I have replaced the screen cable, and the screen display connector but I still do not have a backlight even though the screen is fully functional, from what I understand, there's no load on the voltage output line, hence the reason for...

Hello guys Have got a 16 inches M1 Macbook Pro (820-02382) that is stuck in DFU MODE. The Logic board is spotless( very clean ) I went over the board and I couldn't find a short, PPDCIN is 5V PPBUS is 12.32V. PP3V3AON is present, an not sure exactly what method of troubleshooting to follow...

good day guys , please I would like to understand this concept, am having two separate machines have started to experience this , one was an A1990 and the other one is an A2141, is this caused by the T2 itself or its PMIC? Please guys , am not looking for a specific solution, I would like to...

Good day guys , I hope you all are doing okay , a big thank you in advance to all of you, for always readily providing support here . So I have started to see a wave of MacBook Pro come through the lab for macOS installation, T2 based macs only , and they are always stuck at a message that...

Good day guys Have got an 820-00163 with no PPBUS voltage , there’s no short on the PPBUS and 2 confirmed isl replacements but same results. Have only got 1.5Von PPBUS. initially, the isl was burnt, so was replaced and also current sensing resistors values were off , so also replaced. The two...

Good day I have a MacBook pro 15 inches A1707 (820-00281) stuck on 5V. One of the ports stays steady on 5V, while the other 3 ports are fluctuating, which I thought suggests the one that is stuck on 5V is the issue, hence the reason why I replaced it 3 times with 3 different known working...

Good day everyone and happy new year, I have 16 inches 820-02100 with No Backlight. I have used a known good screen and also tested its screen on another device, the screen is not the problem, there is no liquid damage, no oxidation, or anything related, the logic board is clean but with no...

Good day. I have a MacBook Air 820-02016, the machine displays fine on external but on internal, I only get backlight with no image, am actually lost on where to begin on this one, please help.

Good day guys, I have an 820-00840 with No image, but works fine on the external display. My PP3V3_S0SW_LCD/PP5V_S0SW_LCD signals are not present, only pulse at the first few seconds, I have replaced the video cable as well as the video connector on the board, but no changes, I checked for a...

Good day, guys. I have an 820-00840 that will not start when the battery is connected when it starts and you then connect the battery, the machine will not wake from sleep, the trackpad will however still remain active, and the machine will only display again after the battery is disconnected. I...

Good day guys, I have an M1 board, that does not display on the internal screen, No image or backlight, but I get display on an external screen. The board is clean, I have tested with a different screen but no changes, I tested the original screen with another board, and it displays...

Good day guys . I have a MacBook Pro 16 inches that is stuck in recovery, sometimes it would boot and other times it’s just stuck in recovery, when I run DFU, I get error 36 please do point me to a direction on what I could do :

Good day guys , have got an M1 iMac that that I am trying to type a recovery key in the process of password unlock, though the key entry are 7 fields in total, but am only getting room for 6 entry , and that doesn’t go through

Good day, guys. I hope I get help with this one, this is new for me on this line, I have only encountered this issue on older designs pre-2018 Mac Line-Ups. When I connect the charger, I get a low battery sign on the screen, but that's about it, with or without the battery connected, I get the...

GOOD DAY GUYS: I HAVE MACBOOK PRO 13-INCH TOUCH, WHEN I CONNECT A USB DEVICE ON THE RIGHT-HAND SIDE, I GET THE ERROR MESSAGE ::: unplug the accessory using too much power to re-enable usb devices::: I HAVE REPLACED THE CHARGING PORT BUT NO DIFFERENCE, THIS IS MY FIRST TIME WITH SUCH ISSUE, I DO...

Good day, guys. I have a 15 inches 2016/17 Touch Bar with no display on internal. When I measured in DIODE MODE {{EDP_AUXCH_C_P}} signal was very low compared to a working board which led me to replace U9850 from a donor board, then checked again in Diode mode, and this time the value I got was...

Good day guys . Have got a 16 inches with a very funny behaviour: the machine powers and boots fine with the rich bar on but no display, however when I performed a “ REVIVE /RESTORE “ through DFU, the display will work again until I restart, then it stops working, when I perform the procedure...

Good day guys Have got an 820-00281 that crashes when it wakes from sleep, but this does not happen when I manually put the machine to sleep from the operating system. below are the sleep signal I measured PP0V6_SLEEP = 06V PP0V8_SLEEP = 08V PP1V1_SLEEP = 1V PP1V8_SLEEP =1.8V SMC_LID RIGHT =...

Good day guys please I would like to be pointed to which which programming tool I can get for repairs. For older and newer machines : thank you