Search results

Got some weird anomalies on the screen with ghosting is this a display issue or logic board ?

Purchased this A1932 with a broken screen The crack is minor seems like i should still get an image, back light does turn on. I disconnected the internal display and tried with an external display but cant get an image . I have tested this setup with a A1534 and the external display will work...

Battery is good have tested with another board R5281 diode mode 0.502 R5280 0.450 Replaced u7000 still the same Pin 2 of R5261 stays around 1.1v Would this be SMC? reflow or new one?

So i have had so many of these about 10 where the track pad gets super hot. Have you encountered this problem frequently? is there a common cap that shorts or something? or just bin them?

ppvout_sw_lcdbklt 0V but there is an image on the screen.

Wouldnt turn on liquid damage on u1900 so i replaced it. Got fan spin and power consumption is normal thought it was all good until i put in to body, No display not chime no activity on usb no pram reset. U1900 was from a 2015 model donor board but this board is 2017 markings are different but i...

No signs of liquid damage, Have used a known good track pad. I know this model only uses USB not SPI so should be fixable . Should i check voltages on J5700 with track pad connected? Any known common issues here?

Is this really dodgy or have you done it like this before? I couldn't do it any other way at the moment with my minimal experience but the MacBook does work again now. Glued the chip to the board upside down and ran wires lol.

Have a strange one here. Will only turn on from the charger does not respond to opening the lid or power button. But there are other issues too when it does boot it will load into the critical update, Can only get into operating system in safe mode, had mild liquid damage around U3900 from what...

I got this A1706 It was liquid damaged touch bar and keyboard not working but trackpad works. Found the logic board to be fine tested in another top case So i replaced the touch bar and keyboard, touch bar now works but the keyboard does the exact same thing fans spin fast mac book runnings slow...

820-00165 If i put it to sleep the screen turns off but fan will keep on spinning and power consumption is the same as if it is still on. after about 10 seconds you can still wake it up but any longer it will never wake up again. Have to force shut down and reboot. SMC_LID is 3.4v when trying to...

Hi i have this board that sometimes will work at first but as soon as you turn it off it would not power on again, but i think as long as it was on it would stay on. Anyway i had it sitting around for a while and started looking into it, i have found it in S0 state but missing PP0V6_S0_DDRVTT...

Hello it should be noted that I am noob, This had liquid damage on the I/O board flex cable connector on logic board, first it would turn on no chyme with backlight on but no image. Was unresponsive to NVRAM reset . it Performed SMC reset. After using the Medusa 2 to clear PRAM and ME region it...