Search results

  1. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    Okay: L7130- 12.79 L7520- 5.18 L7320- 1.71 L7310- 1.70 L7630- 1.06 L7430- 1.36 L7710- 0V L3095- 0V hope those help. What a frustrating board as it’s so close to working with the cpu heating up, fan spin etc… BTW I also noticed R6131 wasn’t on the board near the SPI flash. Is that always not...
  2. Melvinzill

    A1502 820-3536A working, but turns off after about 30 minutes

    Okay issues are sadly still there. Machine occasionally just turns off while using it and after a night in sleep I once found it back on the login screen after a reboot. No error messages though...
  3. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    What should I check? There are tons of voltages...
  4. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    Also I’ve noticed pin 2 of R1950 seems to be at 3.3v for about 14s (estimate) before falling to 1.8. Same at Pin 1 so PP3V3_S0 is falling
  5. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    Also super strange is the fact that pin 2 on R1950 occasionally shows 1.8V despite using the 1k resistor. If I unplug and replug power it fixes it
  6. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    And for U1950 we get: Pin 1 - 3.3 Pin 2 - 3.3 Pin 3 - 3.4 Pin 4 - 0 (GND) Pin 5 - 3.4 Pin 6 - 3.4 Pin 7 - 3.4 Pin 8 - 3.4
  7. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    It’s 1.070V. Also now know why the jumper, pad 2 was torn off the board
  8. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    Also still wondering why someone who worked on the board before me ran a jumper between Pin 1 of C1297 and Pin 2 of L1295… Someone seems to have already given up on this one or it failed later
  9. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    So with the 1k resistor it has about 3.3V on both sides of the resistor. Still doesn’t work though… No display or anything.
  10. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    Well the board has seen liquid damage but the are looks fine. I’ll check the chip again and if not try the 1k resistor
  11. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    Okay so I changed it and R1950 but still stuck at 1.7V on R1950…
  12. Melvinzill

    A1502 2013 13? MacBook Pro Fan Spin, no chine or Display output

    Quick question: Is U2100/U7950 on the 820-3332 compatible?
  13. Melvinzill

    T2 Mac serial shenanigans

    Okay so any old programmer supporting the "normal" EFI chip can also write to the T2 flash chip?
  14. Melvinzill

    T2 Mac serial shenanigans

    Hi, so I have an interesting problem. Got in a liquid damaged 16 Inch MacBook Pro for a customer for board repair. Well there is no fixing this thing, it is toast. I sold him an exact replacement 16" as I had a used one. Well he called me next day saying his professional software he uses for...
Top