Search results

all seem good and have good connections but RT365 and RT366 are measuring 9.3k (should be 47k). SPI_IPD_MOSI is 0.284 (0.330 on openboard reference).

IPD_TOUCH_RESET_CONN_L = 2.96v IPD_MCU_RESET_CONN_L = 2.96v PP1V8_AON = 1.8v IPD_MCU_RESET_L = 1.8v IPD_TOUCH_RESET_L = 1.8v

No sorry, i had a typing error. IPD_TOUCH_CLK_CONN is 0.419

Diode mode measurements are ok: I2C_KBD_SCL 0l I2C_KBD_SDA 0l I2C_SMC_IPD_SCL_CONN 0.500 I2C_SMC_IPD_SDA_CONN 0.500 IPD_MCU_INT_CONN_L 0.474 IPD_MCU_RESET_CONN_L 0.679 IPD_MTP_FUNC_1_CONN 0.592 IPD_SYS_AWAKE_CONN 0.431 IPD_TOUCH_CLK_CONN 0.000 IPD_TOUCH_INT_CONN_L 0.730...

UT360 was shorted. After replacing i get 3.3v on PP3V3_S2SW_IPD_F. PP5V_S2_IPD_F, IPD_LID_OPEN_1V8, PPBUS_AONSW_IPD_F are present. (measured on JT400) Still no keyboard or TP Tried different TP flex cable, no change.

Supposedly keyboard and trackpad stopped working after LCD replacement, but angle sensor works good and its oem. PP3V3_S2SW_IPD_F is shorted. I am unsure as to how much voltage to inject since its first time working with this model.

Bad board Good Board L8030 0.100 0.160 L7960 0.016 0.040 L7900 0.000 0.016 L8060 0.000 0.016 L7370 0.002 0.002 L7220 0.001 0.003 L7210 0.001 0.003 L7420 0.001 0.001 L7410 0.000 0.001 L7430 0.001 0.001 L7730 0.125 0.121 L7030 0.407 0.417 L8410 0.734 0.774 L7690 0.329...

PM_RSMRST_L is 0v. PM_PWRBTN_L is 3.3v and drops when triggering SMC_ONOFF_L. On the third trigger ppbus goes down to 1.6v

3V3_S5 present PP3V3_S5G not present

820-00840 with no signs of damage. PPBUS_G3H is 13v. board is missing PP3V3_S0 and PP5V_S0. PM_EN_S0_SW is 0v. R7889 and R7827 have correct values. PMIC_PGH is missing

With charger alone PPBUS_AON is 12.27 and cycles down to 5v. 3V8_AON is stable 3.8v No history available.

DFU restore made no change, only now is not displaying the 9hr timer anymore. With machine turned off consumption oscillates between 30 and 130 mah

No history available. Tried with known working battery and now it boots to OS but it isn't charging the battery. SCL and SDA lines are 3.2v and pulse down to 2.7 each second. Resistance over C5260 is 1.9 ohms and C5220 2.8ohms RD207/8 are good. The charger is recognized as 87w apple in the...

No history available

I replaced the chip from a donor board, and programmed it with a Clean ME

Replaced BIOS chip with CLEAN ME bios. No change.

820-3437 fan spins for a long time but no boot When its spinning but no boot PPVCC_S0_CPU is 1.8v Sometimes after a while it will boot into OS and work all right then shuts down a few minutes in. No boot with SMC bypass. ALL_SYS_PWRGD and AVREF_SMC are 3.3v

PPDCIN_USBC_AON does the same but loops faster. PPBUS_AON starts at 12.2v. Goes down to 8v and then 5v when shutting down. I replaced U5200 just in case. No change.

I noticed sometimes it went into de OS. DFU did nothing. PPDCIN_USBC_AON goes to 0v when it shuts down, then to 5v an then 20v. PPBUS_AON starts at 10v and then goes down to 9v when loading OS. When shutting down it goes to 5v

R7883 is good Any chance is not the SMC? i dont have donor board for this model