Search results

Hey Guys, Severe Liquid damaged 820-01700-A. Came in with 5v on charger. Cleaned corrosion and replaced U9580 as it was cracked. Now getting 20V 0.2A on charger. pp2v5_NAND_SSD0 is shorted to ground. Removed L9580 & L9581 to isolate short. Removed U9580, still shorted. Removed some...

CD3215s replaced. Board gets 20V and is working perfectly. Thank you again for your help. Can mark this as solved.

Sounds good, Will update once those are replaced. Thank you for your help! Much appreciated.

Okay, ordered some CD3215s. Removed U3100. replaced D6902. 3v3_G3H is now 3.4V but it is power cycling. Not sure if that is a normal from missing 2 CD3215 or if there is something else i should be looking for? Will replace both CD3215s when those arrive and update you.

sorry, 0 was meant to be OL. I was getting around 0.02 on 3v3 LDO before I removed UB400 only checked 3v3 LDO. Will recheck all LDO values when I'm back in the shop tomorrow. All 4 CD3215s need to be working for 20V right? Meaning, I cant just remove the bad ICs and use the other USB C...

LDO Diode Mode Readings: U3100: 0.05 u3200: 1.56 UB300: 1.55 UB400: 0 (UB400 Has been removed already due to short on LDO) So u3200 is bad also?

Just checked all my LDOs. U3100 seems to also be shorted to ground. Only getting 0.3V on PP3V3_UPC_XA_LDO and it has very low resistance to ground. only 37 Ohms. I think the issue is with U3100 also. You think i should remove? I really hate the under filled chips so trying to avoid removing lol

Was cleaning up some of my soldering around U6902. L6900 split in two when i lifted it off the board. (Never seen an inductor fail like this) Replaced L6900 and All my voltages changed... Charger is now 5v 0.03A PP3V3_G3H is still low @ 0.89V D6902: Pin 1: 0V Pin 2: 5.2V Pin 3: 3.65V 1...

Thank you, pleasure to be here. Unfortunately i failed to note the values before replacing the chip but Here are the current Values of U6902: 1: 4.06V 2: 4.27V 3: 0.34V 4:0 5:0 6:0 7:0 8: 4.27V 9: 0.1V 10: 5V D6902: Pin 1: 0V Pin 2: 5.2V Pin 3: 4.27

Received computer from customer. No history, Just stopped charging one day and wont power on. No Liquid damage found. Was getting 5v 0.3 amps from charger. PP3V3_G3H was at 2.7V No short on PP3V3_G3H. All other lines on U6903 were present and correct. Surrounding resistors were correct...