-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
Search results
-
M
Touchbar 820-00923-05 Dead not turning on missing PM_SLP_S5_L
Yes! :) This was a funny one. After taking some time to inspect carefully the SMC area, I noticed a blurry stain under it on the 4th solder ball zone, the PM_PWRBTN_L contact point! It was hard to check under it as the angle is not the best, but there it was. Some flux, a good reflow . and...- Magneh
- Post #9
- Forum: Macbook Logic Board Repair Questions
-
M
Touchbar 820-00923-05 Dead not turning on missing PM_SLP_S5_L
J1800 area is clean, the board is as new R1450 is OK. I guess only thing pulling down this signal is the SMC or U0500 right? Diode mode at PM_PWRBTN_L 0.52- Magneh
- Post #7
- Forum: Macbook Logic Board Repair Questions
-
M
Touchbar 820-00923-05 Dead not turning on missing PM_SLP_S5_L
PM_PWRBTN_L is 1.24V and doesnt change even after shorting SMC_ONOFF_L- Magneh
- Post #5
- Forum: Macbook Logic Board Repair Questions
-
M
Touchbar 820-00923-05 Dead not turning on missing PM_SLP_S5_L
Hi, Yes, PM_SLP_SUS_L is 3.35V. F7000 is 13.05V L7660 3.35V- Magneh
- Post #3
- Forum: Macbook Logic Board Repair Questions
-
M
Touchbar 820-00923-05 Dead not turning on missing PM_SLP_S5_L
Hello there! I have a dead touchbar , no signs of life, which as far as I could get is missing PM_SLP_S5_L. No signs of liquid damage, board seems pretty neat. All the power rails read OK for this stage, and I'm using a 820-00239 schematic and BV. This comes out from U0500 and I've measured...- Magneh
- Thread
- Replies: 8
- Forum: Macbook Logic Board Repair Questions