For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
I mistake with efi file ,reflash with 2631 instead 2632 ,thats maybe cause the not finishing installation ,i try few 2632 but loading bar stuck .can u post me clean me bios emc2632 thx
Macbook when installing from usb recognise internal ssd and format,and when it pass first part of installation restart with flashing folder ,I try to start with another ssd from different macbook still wont boot from it,but again if i boot from installation usb its recognise ssd in disk...
I use 2 different bios from donor board ,try usb and get lights for about 30 sec then off ,if you unplug and recconect lights is on again for around 30 sec
Reflow the smc ,flash new bios smc2925 clean,still no image
all rail present
all_sys-pwgrd 3.3v
cpu_vcore 1.8v
only i notice that is spi_clk is low 0v (maybe thats normal)
Update I found that my PPVBUS_LIO is 15v and PP1V2_S5SW 0V ,on U8130 found that P1V2S5SW_HSMUX_EN_R is only 0.5v and its coming from U3100 ,any clue ??
Hi Macbook when connected charger wont start
PPBUS_g3h 8.6v
PP3V3_G3H 3.3v
PPVRTC_G3H 3.3v
PP5V_G3H 5v
PP5V_S5 5v
PP3V3_S5 3.3v
PP3V3_SUS 3.3v
Missing S4 rails and on Bios SPI rails I have 1.5v i think should be 3.3v ,try to remove bios still showing 1.5v ,No PM_slp_s4 also