bjf
Member
I have a liquid-damaged 820-00165 with no magsafe light. It has stable (but low) main G3H voltage at 8.19V. It looks like the SMC is off. Using known-good side board and cable.
• I have 3.42V going to the SMC.
• No PP3V3_S5.
• No SMC_CLK32K.
• PP1V2_S5_SMC_VDDC is at 1.17V
• SMC_EXTAL is at 1.3V.
• SMC_XTAL_R is at 0V.
Not sure what my next move should be.
**Probably no point in uploading the pics since the forum upload settings are killing the resolution but I put them up anyway in case it might help.
• I have 3.42V going to the SMC.
• No PP3V3_S5.
• No SMC_CLK32K.
• PP1V2_S5_SMC_VDDC is at 1.17V
• SMC_EXTAL is at 1.3V.
• SMC_XTAL_R is at 0V.
Not sure what my next move should be.
**Probably no point in uploading the pics since the forum upload settings are killing the resolution but I put them up anyway in case it might help.
Attachments
Last edited: