Arrived with liquid damage mainly in speaker section of the board.
After replacing everything board was working fine. Stopped turning on again. 2.2 ohms on PPBUS_G3H
L7430/20 are both also 2.2 ohms. Does this automatically mean bad U7430/20?
Similar board with different issue also reads 2.2ohms on L7430/20 but much higher ohms on PPBUS_G3H
After replacing everything board was working fine. Stopped turning on again. 2.2 ohms on PPBUS_G3H
L7430/20 are both also 2.2 ohms. Does this automatically mean bad U7430/20?
Similar board with different issue also reads 2.2ohms on L7430/20 but much higher ohms on PPBUS_G3H