javier_herart
Member
Hello.
I have no experience on M1/M2 boards. I started to read and tooks the measurements below.
Any advace will be appreciated.
Wont switch to 20V.
Takes 5V and 0.100A
Same behaviour on Magsafe and both C ports
MB looks clean. Couldnt find any blown component nor liquid damage.
Diode:
PPBUS_AON: 589
PP3V8_AON: 542
Voltages:
F5200(PPBUS_AON): 12.3v
L5800(PP3V8_AON): 3.8V
LC320 (PP5V_S2): 5.17V
L8290 (PPVDD_S1_DCS): 0.7V
I have no experience on M1/M2 boards. I started to read and tooks the measurements below.
Any advace will be appreciated.
Wont switch to 20V.
Takes 5V and 0.100A
Same behaviour on Magsafe and both C ports
MB looks clean. Couldnt find any blown component nor liquid damage.
Diode:
PPBUS_AON: 589
PP3V8_AON: 542
Voltages:
F5200(PPBUS_AON): 12.3v
L5800(PP3V8_AON): 3.8V
LC320 (PP5V_S2): 5.17V
L8290 (PPVDD_S1_DCS): 0.7V