G.Beard
New member
Hi.
This machine has no signs of liquid damage at all.
C6612 was mostly ash and bare metal with a dark blast radius on the PCB.
Was no power, replaced C6612 and it now powers but will power off abruptly most of the time.
Also ISL6259 seems to warm a little, not hot just warm, when MagSafe is plugged in so I'll start looking around there.
Still powers abruptly powers off without charger plugged in.
Any likely causes or rails to start testing please?
This machine has no signs of liquid damage at all.
C6612 was mostly ash and bare metal with a dark blast radius on the PCB.
Was no power, replaced C6612 and it now powers but will power off abruptly most of the time.
Also ISL6259 seems to warm a little, not hot just warm, when MagSafe is plugged in so I'll start looking around there.
Still powers abruptly powers off without charger plugged in.
Any likely causes or rails to start testing please?