The MagSafe has green light and fans spinning, but no screen and chime.
PP0V9_ENET and ALL_SYS_PWRGD 1.8v are to low. Where can I find the reason for this? Because all the input voltages are right?
PP5V_S0 5.08v
PP3V3_S0 3.3v
PP1V5_S0 1.51v
PP1V05_S0 1.05v
PP1V05_S0_MCP_PLL_UF 1.05v
PPVCORE_S0_CPU 0.99v (1.25v)
PPVCORE_S0_MCP 0.93v (1.05V
PPDDRVTT_S0 0.68v (0.75v)
PP3V3_ENET 3.3v
PP0V9_ENET 0.29 (0.9V)
SMC_PM_G2_ENABLE 3.3v
PM_SLP_S4_L 3.3v
PM_SLP_S3_L 3.3v
ALL_SYS_PWRGD 1.8v
C7990 had corrosion. Cleaned it but not replaced.
PP0V9_ENET and ALL_SYS_PWRGD 1.8v are to low. Where can I find the reason for this? Because all the input voltages are right?
PP5V_S0 5.08v
PP3V3_S0 3.3v
PP1V5_S0 1.51v
PP1V05_S0 1.05v
PP1V05_S0_MCP_PLL_UF 1.05v
PPVCORE_S0_CPU 0.99v (1.25v)
PPVCORE_S0_MCP 0.93v (1.05V
PPDDRVTT_S0 0.68v (0.75v)
PP3V3_ENET 3.3v
PP0V9_ENET 0.29 (0.9V)
SMC_PM_G2_ENABLE 3.3v
PM_SLP_S4_L 3.3v
PM_SLP_S3_L 3.3v
ALL_SYS_PWRGD 1.8v
C7990 had corrosion. Cleaned it but not replaced.