I have a board that only goes to S0 state when both the charger and battery is plugged in
PPBUS_G3H voltage with only the charger plugged in is 12.5V and drops to 11.7V when the battery is plugged in.
when only plugged into the charger it reaches S5 state
when the battery is connected and then plugged in it turns on.
anyone had a similar issue?
PPBUS_G3H voltage with only the charger plugged in is 12.5V and drops to 11.7V when the battery is plugged in.
when only plugged into the charger it reaches S5 state
when the battery is connected and then plugged in it turns on.
anyone had a similar issue?