820-2936 Macbook pro A1278 VD0R Sensor Issue [solved]

[Dozer]

i found that threat:

https://www.rossmanngroup.com/board...36-macbook-pro-a1278-vd0r-sensor-issue-solved

i had the same problem.

but i feed the board with a labor unit (20A possible) and a macsafe cable

I found out if i feed the board with 18.5V then i get the same error about the VD0R Sensor

but if i feed the board with 16.5V then there is no error.

perhaps that could be helping someone as well. if possible please add still to the closed threat.

 

[smiba]

This is to be expected as the right charger for 13" models supplies 16.5V.
In ASD EFI you can get a full diagnostic page showing the High and Low warning values and the current readout value. This would show that 18.5V is above the configured High limit

Glad you figured it out though, I was confused by this when I started for a moment as well