Inwerp
New member
was fully dead (customer shorted something on the board, he used to power it on with a SMC_ONOFF for a year(!), and suddenly it stopped working),
after replacing u7000(was clearly burned), current sense resistors and boot capacitor. Now I have my g3hot back, but still no charge and no power.
power consumption is stable at 0.07a, smc_onoff brings it up to 0.1 for a couple of seconds.
no shorts found so far.
is that an SMC and this board will never be great again?
I have already invested too much replacing every single resistor around u7000 so i'm ready give up.
after replacing u7000(was clearly burned), current sense resistors and boot capacitor. Now I have my g3hot back, but still no charge and no power.
power consumption is stable at 0.07a, smc_onoff brings it up to 0.1 for a couple of seconds.
no shorts found so far.
is that an SMC and this board will never be great again?
I have already invested too much replacing every single resistor around u7000 so i'm ready give up.
Last edited:
