820-3536-A J7000 connector source?

[galvestonmac]

Anyone have a recommendation for replacement J7000 DC in power connectors for the 820-3536-A? The 6 pin connector on the logic board, not the DC IN board. Thanks!

 

[dukefawks]

Donor boards, AliExpress/Ebay is full of them for $20 or so.

 

[galvestonmac]

Right, got that covered. I'm looking for new ones that have NOT been soldered on the boards yet. I haven't have much luck with trying to reuse connectors that come from donor boards. The plastic usually warped and melts and becomes un-usable after removing it.

 

[dukefawks]

If you cannot remove these connectors without destroying them you have some soldering to practice. It should be absolutely no problem. Use bottom heat and go slow with top heat.

 

[galvestonmac]

Roger that