820-3536 SSD connector replacement

[Jay]

Found J3700 to have an issue but having a hard time tracking down a replacement. Anyone have a website or source I can order this connector from?

 

[aprendiz]

Just take it from donor board....

 

[Jay]

If it wasn’t for melting the plastic I would. Unable to find the sweet spot of melting solder without melting plastic.

 

[aprendiz]

Just apply heat in the bottom of the connector, use flux, max. temp on air station....

 

[Jay]

Max temp? That won’t just melt the connector and plastics around it but probably the board itself...

 

[wirelessplanet]

don't use max temp. On my hot air station i use 390-410. trick is heat under the connector though.

 

[Jay]

Alright will try that on a donor. Just to make sure, you're talking F and not C, right?

 

[aprendiz]

Come on!! you will take it from donor board that you dont care about it, and of course the heat is applied on the other side of the connector, under the connector.... Maybe don't explain myself well...