Bought an iphone 6s plus with no power..

point0001cents

New member
First no water damage or moisture, like new.. Replaced tristar. NO GO, So it had two long screw damage, dug into and exposed the traces. Looks like there was no damage to the third layer in which the traces are.. Later found out that there is short on pp_vcc_main which is 4.6v. So i injected 4.6v and set it at 1A. when the 4.6v is turned on it drops to 1.95V and max current draw which it's set at 1A..Confused what's going on..Feels void when I just attended Jessa's and Louis Class this december.
 

Attachments

  • photo872.jpg
    photo872.jpg
    168.9 KB · Views: 0
  • photo871.jpg
    photo871.jpg
    158.8 KB · Views: 0
Top