thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

820-2530 battery issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • aprendiz
    replied
    Dont need BGA machine, it is a small chip ..... Use your hot air station and preheater if you have, hot air station is enough if you don't have preheater, practice in donor boards first ....

    Leave a comment:


  • samiam
    replied
    don't have a BGA machine

    Leave a comment:


  • dukefawks
    replied
    Replace it from donor board.

    Leave a comment:


  • samiam
    replied
    even though it can run off of batt after i start it on AC? damn so close

    Leave a comment:


  • dukefawks
    replied
    Dead SMC...

    Leave a comment:


  • samiam
    replied
    maybe too much heat/time on ISL when I was putting it down? Do you think I should try another one?

    pins 17/18 still giving 21.1k resistance

    Leave a comment:


  • samiam
    replied
    nope, doesn't see battery and BIL doesn't light up

    Leave a comment:


  • dukefawks
    replied
    Battery recognized in OSX?

    Leave a comment:


  • samiam
    replied
    replaced the ISL and now it's running off of AC but still no battery, everything else looks fine any ideas?

    Leave a comment:


  • dukefawks
    replied
    Yes that is of course possible. Check R7040 value against the schematic. Also check R7005

    Leave a comment:


  • samiam
    replied
    R7040 is still there also
    is a 6258AHRTZ

    i assume the ISL rework and everything was working until a shitty charger did something to bring it to where it is now

    could the ISL gotten fried and everything else be fine?

    Leave a comment:


  • dukefawks
    replied
    Check if there is actually a 6258 on there on not a 6259. Resistor between C7040/41 is R7040 I guess? If that all is ok then replace U7000

    Leave a comment:


  • samiam
    started a topic 820-2530 battery issues

    820-2530 battery issues

    this board has been worked on by someone else before, U7000 looks newer and they put a resistor between c7041and c7040

    magsafe green light comes on, but won't charge (no PPBUS_g3H) unless i hook up a charged battery, then will actually power on. but won't power on with battery only
    all current sense resistors look ok

    i get 20ish ohms resistance between pins 17/18 and 27/28 on U7000

    adapter sense is 3.3V but looks like something keeps trying to pull it down to 3.15 when I check SMC_BC_ACOK on U6900 and U6901

    is it the ISL or something else?

thread bottom ad

Collapse
Working...
X