A1465 11.6 MacBook air
PPBUS_G3H : 8.4V
PPBUS_S5_HS_COMPUTING_ISNS: 8.4V
PPBUS_S5_HS_OTHER_ISNS :8.4V
PP3V42_G3H: 3.4V
PPVRTC_G3H:3.1V
PP5V_S5 : 5V
PP3V3_S5: 3.3v
PP5V_S0: when I diode test it shows .003 and .005 and beep to ground booth sides
U7320 was getting really really hot burning lips man , I remove it to check if that remove short on the 5V_S0 but nop.
What should me my next step? I was thinking on injecting voltage to the 5V_S0 line and find out where is getting hot?
any other rails I should check?
PPBUS_G3H : 8.4V
PPBUS_S5_HS_COMPUTING_ISNS: 8.4V
PPBUS_S5_HS_OTHER_ISNS :8.4V
PP3V42_G3H: 3.4V
PPVRTC_G3H:3.1V
PP5V_S5 : 5V
PP3V3_S5: 3.3v
PP5V_S0: when I diode test it shows .003 and .005 and beep to ground booth sides
U7320 was getting really really hot burning lips man , I remove it to check if that remove short on the 5V_S0 but nop.
What should me my next step? I was thinking on injecting voltage to the 5V_S0 line and find out where is getting hot?
any other rails I should check?