thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

820-3435 not charging

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dukefawks
    replied
    All audio is on the IO board so first suspect would be again the IO board or cable.

    Leave a comment:


  • laptopcity
    replied
    Hi you was right new dc in board and cable cured the charging issue but it has no sound, no chime at start no light in headphone jack, reset pram , what ive checked so far is:
    u8040 pp1v5_so =1.5v audio enable =3.2v pp1v5_sosw_audio =1.5v
    u6410 have 5v at pvdd no im getting kinda lost :-(

    Leave a comment:


  • laptopcity
    replied
    thanks guys ill give it a try, just took out dc inboard and under the scope looks like the dc inboard has had a spill
    Last edited by laptopcity; 02-02-2017, 03:20 PM.

    Leave a comment:


  • larossmann
    replied
    No light on the charger is the first issue to solve.

    1) is CHGR_ACOK present on pin 14 of U7100?
    2) are the PP3V42_G3H, SYS_ONEWIRE, and SMC_BC_ACOK pins on J4002?
    3) Did you try a known good DC in board and DC in cable?

    99% of the time it is a bad cable between dc in board & logic board, or burned pins on the connector for PP3V42_G3H, SYS_ONEWIRE, and SMC_BC_ACOK.

    Leave a comment:


  • dukefawks
    replied
    No green light so change IO board and flat cable.

    Leave a comment:


  • arghhh
    replied
    Yes it's possible.

    Leave a comment:


  • laptopcity
    started a topic 820-3435 not charging

    820-3435 not charging

    Hi, i have an 820-3435 that isnt charging the battery, laptop boots to os, shows battery percentage and charging icon but wont charge the battery, also NO green light on charger, tried different battery and chargers same result , checked current sensing resistors on both circuits and even changed isl6259 just incase, could the issue be with the onewire circuit even though i thought that circuit had to work for the board to even turn on ???

thread bottom ad

Collapse
Working...
X