No-Clean
Member
Mac was liquid damage but the board is clean, the CD3215 on this board are underfilled so no liquid got under them and all other components around the CD3215 chips look clean. I tried restoring the T2 firmware and also read this post: https://boards.rossmanngroup.com/forum/board-repair-troubleshooting/56483-820-00850-no-20v but I cannot get the board to go into DFU mode and when I try to put it into restore mode nothing happens.
ppbus 12v
pp3v3_g3h 0.019v
At one point one of the ports boot loop but only one time.
ppbus 12v
pp3v3_g3h 0.019v
At one point one of the ports boot loop but only one time.