Recent content by nicerepairs

Activity confirmed. LED is flashing... No idea at this point.

How do I do that?

To clarify even more: On external monitor it has signal, but screen stays black (slightly lit but still black). Monitor detects that something is plugged in. Tried Target Disk mode, unfortunately doesn't work.

Disconnected internal LCD, external video not turning on. (It used to, but after a few screen replacements it stopped) I'll try Target Disk mode. Caps Lock light reacts correctly.

Yes, sorry for misunderstanding. In diode mode. Pin 1 and Pin 3 show different (Tested on another board, it's 0.534L on both). This one, Pin 1 is 0L, Pin 3 is 0.250L... Anything I can do if CPU eDP is fried? Reflow or anything? Information on this Macbook is super important. Any way I can...

Caps Lock light is on. Current is 0.433A after Macbook boots.

0.220V on Pin 3. 0V on Pin 1... That's what I measure. I get voltage on CPU coils.

QUOTE (I lost access to my other account, that's why I quote this here, sorry) : "I have this really weird problem. Screen is 90% black (from bottom to top, only top bar is visible). I changed it with another from a donor but there was some dimmed and almost black lines on top. I tested his...