Recent content by SoroS

It works with a SMC from a 820 3023 MBA This was also a test for me to see how hard is to reball and change a SMC. 2-3 hours to do it but finally works :) next one gonna be faster. Thanks Duke. Solved

Chemtronics ES132 works fine for me. found it on MOUSER

Hi, I have a 3024 board wich was LD, it starts but the battery is not recognized. I think is the SMC but don't have a donor board or new smc for this (have in stock only MBP 2936 SMC's) there are other smc which are compatible with this board. I've hoped this would not be a SMC problem so I've...

Without the fuses I have 2V on PPBUS

So we gonna call this one "Mort pour la France". I've followed your advice Duke but the Q7080 is not the culprit. I've folowed the short from L9830 and checked every cap to end up to the U1800 Thanks for the help anyway.

Just made another discovery short to ground on L9830 ... I have a bad feeling about this :(:(:(

once i've removed the fuses and checked them off the board they seem ok both of them For me the problem is after the F7040 / F7041 to the system side. With the fuses on the charger blinks without them is green and then solid orange I've tried another ISL6259 it does the same. Without the ISL...

No progress so far. So with the F7040 and F7041 removed I have greenlight . I guess something is going wrong on PPBUS-G3H but I don't have any idea on what. What should I try next?

I have only a discharged baterry , when I plug the battery and try to turn it on it shows the low battery icon on screen. C7005 pin 1 - when greenlight I have 12 or 10 V on it and then goes down on Pin 2 - 0 V no mather the state of the charger light U 7000 Pins 17/18 - 6ohm and Pins 27/28 -...

Hi, I have a 820 3332 board on which the customer fried the magsafe and the tried to replace it. The F6905 was blown up, after replacing the fuse the charger has flashing green light every 3 sec When measuring PPBUS_G3H and PP3V42 they fluctuate, when charger is green they have the usual...

Don't you have a second one for transplant? or maybe someone here has one like it and can give you a hand with values. I have only toshiba ssd. sorry

Seen that too, even so it heats up fast enough, 1h40min to 60C fast for me.

First test with the cp500d whent well, the smell of uc cleaner is ok. used 400ml of uc cleaner for 4L off distilled water.

once I receive my crest I will share my experience.

just 103 ml? and worked well? I thought you will need 500ml for 5L of d water. thanks for the info Still waiting for my ultrasonic