For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
Yes tried other card, didn't work, was missing Pin10 compared to good board, replaced U3510 and customers wifi turned out bad as well - issue solved, thank you very much for all your input.
Replaced SMC,
I got it to turn on however now ran into issue with no keyboard/trackpad, opt out keyboard/trackpad/ipd cable - tested logic board into good working housing - issue the same.
If Im trying to bypass SMC now fan spins twice with few second interval PP5V_S4RS3 goes up to 5V at that time, but no further action unless I trigger SMC_ONOFF_L pads with tweezers - fan gives little spin everytime.
Hi guys,
Have 820-00165 here, liquid damage while ago, machine was working fine, suddenly stopped working 2 days ago, U1900 corrosion on 2 pins, replaced, U6100 Pin 5 small corrosion, but all voltages(3.3) present at U6100, jtag removed was corroded, U7501 looks good, SMC good, small crap around...
Sorry for silly question as obviously different air stations different temperatures however what would be good T to re-heat internal of the chip without messing up solder balls under the chip(specifically under filled chips)? From experience too hot pushed solder balls out and messed up the...
Did you try board in different TopCase to opt out keyboard? it might cause same behaviour with faulty keyboard, and of course try with good clean IPD cable.
On 16" models there is fewer connectors, look online for teardown, I believe iFixit might have, hadn't looked at it, since there is a few they might left something under the board as fans are getting plugged into board directly now again....just carefully check again if every single connector...
Yes tried that, as well as this "other sort" of SMC by Apple with T2 - CONTROL+OPTION+RIGHT SHIFT+POWER BUTTON and ordinary of course with keyboard and by disconnecting battery,
Thanks
Hi All,
Hope somebody can point me right direction, 820-01521 minor liquid damage near the J3099, C7677/76/75, R1420/21, CC714/15, R1425, CC763/62, R1422/23 - all were affected by liquid, cleaned and replaced, machine now boots however after login loading bar reaches nearly 100% and it freezes...