Instafixx
Active member
Using Schematics of 820-02918.
Amp meter goes upto 20V stays for sometime with good amp pull and then reboots.
PP1v8_touchid_filt_conn was shorted due to a corroded cap. Removed and short gone.
Still the issue persists.
PPBUS shows 13.3V with just battery/trackpad and display connected. PPBUS pulses along with the amp meter.
Amp meter goes upto 20V stays for sometime with good amp pull and then reboots.
PP1v8_touchid_filt_conn was shorted due to a corroded cap. Removed and short gone.
Still the issue persists.
PPBUS shows 13.3V with just battery/trackpad and display connected. PPBUS pulses along with the amp meter.
